Examples of 'mowing head' in a sentence
Meaning of "mowing head"
This phrase is unclear without further context. It potentially refers to the act of cutting or trimming hair, particularly on the head, using a lawnmower-like device. This phrase may also have a figurative or metaphorical meaning depending on the context
How to use "mowing head" in a sentence
Basic
Advanced
mowing head
The mowing head is now full.
Refer to the leaflet supplied with the mowing head.
Mounting the mowing head with a threaded connection.
Refer to the instructions supplied with the mowing head.
Only the provided mowing head may be used.
Notice on new machines that come standard with a mowing head only.
Removing the mowing head and remaining nylon line.
Direction of rotation is marked by arrow on inside of mowing head deflector.
The mowing head is supplied with illustrated instructions for replacing the blades.
Keep the instructions for the mowing head in a safe place.
These recommendations also apply to the blades of the PolyCut mowing head.
Fresh line is advanced every time the mowing head is tapped on the ground.
The mowing head is supplied with illustrated instructions for replacing the nylon line.
Keep the instruction leaflet for the mowing head in a safe place.
Frayed line is replaced by a simple adjustment see instruction sheet supplied with mowing head.
See also
Always check the mowing head for signs of wear before replacing the nylon line.
N Fit the empty spool in the mowing head.
Always check the mowing head for signs of wear before installing new cutting blades.
N Tighten down the mowing head firmly.
It is important to follow the maintenance instructions for the Polycut mowing head.
Always inspect the mowing head for signs of wear before fitting replacement nylon line.
If there are signs of serious wear, replace the complete mowing head.
N Fit nylon line in mowing head as described in the instructions supplied.
Check that the spring is installed see " Mounting the Mowing Head.
Place the Rototrim mowing head with the depression facing outward.
These parts must be fitted to the deflector ( 1 ) when you use a mowing head.
STIHL AutoCut mowing head Nylon cutting line advances automatically when tapped against the ground TapAction.
N With the engine running, hold the rotating mowing head above the grass surface.
STIHL SuperCut mowing head Fresh line is advanced automatically.
The trimmer comes from the factory with the AutoCut 2-2 mowing head already fitted.
N Unscrew the mowing head counterclockwise.
Mowing Head The cutting attachment for cutting grass and similar material.
N If necessary, remove the mowing head.
The STIHL Autocut mowing head produces a clean and tidy finish.
N Position your trimmer so that the mowing head ( 1 ) faces up.
STIHL FixCut mowing head Observe wear indicators.
The trimmer comes standard with an AutoCut C 4-2 mowing head.
N Place the mowing head on the thrust plate 2.
FIGURE 4.8 Examples of working positions of the multifunction arm with mowing head GK80L.
STIHL PolyCut mowing head Uses either nylon lines or nonrigid, pivoting polymer blades.
N Disengage the spool ( 2 ), take it out of the mowing head and remove the remaining line.
N Screw the mowing head counterclockwise on to the shaft ( 1 ) as far as stop.
STIHL FixCut mowing head Uses pre-cut lengths of nylon line.
N Hold the mowing head steady and rotate the cap ( 1 ) counterclockwise until it can be removed.
The Tactil mowing head features 7 new technical innovations and 19 specific improvements for operators,.
N Open the mowing head - hold it steady with one hand and turn the cap ( 1 ) counterclockwise.
N Mount the mowing head - see " Mounting the Cutting Attachment.
STIHL Autocut 5-2 Mowing Head Nylon cutting line advances automatically when tapped against the ground.
