Examples of 'n sodium hydroxide solution' in a sentence
Meaning of "n sodium hydroxide solution"
N sodium hydroxide solution: A chemical solution containing sodium hydroxide, commonly known as caustic soda, used in various industrial processes such as manufacturing soaps and detergents, and in chemical laboratories for titration and pH adjustments
How to use "n sodium hydroxide solution" in a sentence
Basic
Advanced
n sodium hydroxide solution
The residue is taken up in ethyl acetate and then washed with N sodium hydroxide solution.
N Sodium hydroxide solution.
The acidic phase is rendered basic with N sodium hydroxide solution and then extracted with ether.
A 5 N sodium hydroxide solution and chloroform were added to the residue, followed by filtration through celite.
It is then stored in N sodium hydroxide solution.
A 2 N sodium hydroxide solution was then added.
This residue is dissolved in a mixture of diethyl ether and a 2 N sodium hydroxide solution.
Dichloromethane and 1 N sodium hydroxide solution were added to the solids.
Ice was added to the residue, followed by neutralization with a 5 N sodium hydroxide solution.
To the mixture was added 1 N sodium hydroxide solution to render it alkaline.
Remove the solvent under vacuum and dissolve the residue in ether and 5 N sodium hydroxide solution.
The crude product was washed with 1 N sodium hydroxide solution and extracted with DCM.
A pH value of 6.1 of the reaction mixture is adjusted by addition of 1 N sodium hydroxide solution.
About 5 mℓ of a 1 N sodium hydroxide solution was added thereto to adjust the pH to about 7.
The reaction mixtures were quenched with 1 N sodium hydroxide solution.
See also
Aqueous 1 N sodium hydroxide solution is added until pH10 is reached.
The decellularized pericardium was placed in 1 N sodium hydroxide solution to be treated for one hour.
Liter of a 3 N sodium hydroxide solution is added, followed by stirring for 30 minutes.
The aqueous phase is rendered alkaline with 1 N sodium hydroxide solution.
Titrate with 0.1 N sodium hydroxide solution until a permanent pink colour is reached.
The reaction mixture was made alkaline with a 5 N sodium hydroxide solution.
Thereafter, 5.16 ml of a 5 N sodium hydroxide solution was added dropwise at room temperature.
The reaction medium is hydrolysed with an aqueous 1 N sodium hydroxide solution.
Then, it was neutralized with 0.1 N sodium hydroxide solution and the solvent was distilled off.
The residual foam was partitioned between ethyl acetate and 1 N sodium hydroxide solution.
A 5 N sodium hydroxide solution ( 5 mL ) was added to the solution.
The reaction medium was extracted with a 1 N sodium hydroxide solution and separated by settling out.
The cooled mixture was filtered through Arbocel ®, and the filtrate poured into 1 N sodium hydroxide solution.
Neutralize the acidic aqueous layer with 5 N sodium hydroxide solution and extract twice with ether.
Before the purification is completed, the solution is adjusted to pH = 7 using 0.1 N sodium hydroxide solution.
The resulting solution was titrated with 0.01 N sodium hydroxide solution using phenolphthalein as the indicator.
The solution was adjusted to weak alkaline solution ( about pH 8 ) with 1 N sodium hydroxide solution.
An ice-cooled 0.5 N sodium hydroxide solution was added to the residue.
Water was added and the pH was adjusted to -12 by addition of 2 N sodium hydroxide solution.
The pH was adjusted with 0.1 N Sodium hydroxide solution as shown in Table 9.
And then pH of the resulting solution was adjusted to 3.5 with 1 N sodium hydroxide solution.
The combined fractions were treated with 1 N sodium hydroxide solution ( 2 mL ) and concentrated.
The mixture was concentrated, and was then treated with 50 ml of 1 N sodium hydroxide solution.
The reaction was cooled in ice water and 3 N sodium hydroxide solution ( 5 ml ) was added.
The isolated aqueous phase was basified by addition of 5.9 ml of 0.1 N sodium hydroxide solution.
The precipitate was dissolved in 500 ml of a 1.5 N sodium hydroxide solution and neutralized with 2 M hydrochloric acid.
The filter paper was rinsed with 33 mL of a 1 N sodium hydroxide solution.
This was adjusted to pH 8 with 5 N sodium hydroxide solution.
The reaction mixture is then poured into 20 ml of 1 N sodium hydroxide solution.
The resulting mixture is neutralized at 0 °C with 2 N sodium hydroxide solution.
Then, the pH of the resultant mixture was adjusted to 7.4 with 1 N sodium hydroxide solution.
Water was then added and the pH adjusted to pH-7.5 using a 1 N sodium hydroxide solution.
The layers were partitioned and the organic layer was washed with 1 N sodium hydroxide solution ( 300 mL ).
The pH was maintained at 9.3 by addition of 3 N sodium hydroxide solution.
The filtrate was washed with 0.5 N sodium hydroxide solution.
You'll also be interested in:
Examples of using Sodium
Show more
Ammonia and sodium hypochlorite hook up at a bar
You need to watch your sodium levels
Sodium nitrate and potassium nitrate mixture
Examples of using Solution
Show more
One proposed solution is sustained livelihood programmes
Find a ripe moment to propose solution or option
There is now a solution to most of these problems
Examples of using Hydroxide
Show more
Sodium hydroxide and water for injections
The minus log of the hydroxide concentration
Sodium hydroxide can also be independently produced
