Examples of 'negative cable' in a sentence
Meaning of "negative cable"
negative cable ~ a cable used in electrical systems to create a return path for an electric current in order to complete a circuit; often distinguished from positive cables by color or markings
How to use "negative cable" in a sentence
Basic
Advanced
negative cable
And negative cable to the negative terminal.
It took just add a big negative cable.
From the negative cable heavy black wire.
I habitually only disconnect the negative cable.
Disconnect the negative cable from the battery.
Disconnect and isolate the battery negative cable.
Always make sure the negative cable is hooked up last.
The negative cable is connected to the negative terminal of the battery.
Never wire the speaker negative cable directly.
The negative cable is black.
Do the same thing for the negative cable.
Lift the negative cable away from the terminal.
First connect the negative cable.
The negative cable can be directly attached to the negative battery terminal.
Start by removing the negative cable.
See also
Disconnect the negative cable and then the positive cable.
It is connected to the battery negative cable.
Then the negative cable is to be clamped to the section you will work.
I think your best shot is to take the negative cable off.
We take general negative cable and the positive from each cell.
First connect the positive cable and then the negative cable.
Never wire the speaker negative cable directly to ground.
Remove the hex bolt and hex nut from the negative cable.
Connect the negative cable to a good ground point away from the battery.
For direct connection to the battery the positive and negative cable must be fused.
Remove the negative cable from the battery to stop current flowing through the car.
Reattach and tighten the positive cable first before reattaching the negative cable.
Disconnect the battery negative cable from battery and wait for at least thirty seconds bef.
Loosen the bolt that holds the negative terminal and remove the negative cable first.
ALWAYS connect the negative cable last when installing batteries.
When working on the generator, always disconnect negative cable from battery.
Then reconnect the negative cable to the vehicle ‘ s battery.
If connecting directly to the battery, the positive and negative cable must be fused.
Disconnect the negative cable from your car 's battery.
If equipped with a side airbag, reconnect the negative cable to the battery.
If negative cable goes to the frame of the car, this is a negative ground car.
While reconnecting, the negative cable is to be attached first.
The negative cable is normally black, and the positive cable is normally red.
Before installing, be sure to disconnect the negative cable of the car battery.
Do not attach the negative cable to the dead battery since it will spark!
When disconnecting the battery cables, always disconnect the negative cable first.
Disconnect the battery negative cable and wait for at least 3 minutes before beginning work.
Remove the cables from the battery, starting with the negative cable.
I don't think so if the Negative cable is not hooked up to the battery.
When installing the battery, first connect the positive cable and then the negative cable.
Why do you recommend disconnecting the negative cable from the vehicle battery?
Lay the negative cable of the battery or earth cable to the IU0U automatic charger.
When working on the generator, always disconnect the negative cable from the battery if equipped.
How should the negative cable be connected? See answer Minimize.
The next step is to disconnect and disconnect the negative cable from your vehicle 's battery.
You'll also be interested in:
Examples of using Negative
Show more
Dissolution of etheric negative etheric or astral objects
Negative test results would also be recorded
Suitable for extended negative pressure service
Examples of using Cable
Show more
Secure the coaxial cable to the ceiling
A cable tie is provided with the appliance
Use plenum rated cable where it is required
