Examples of 'negative pulse' in a sentence
Meaning of "negative pulse"
negative pulse - This phrase refers to an electrical signal or waveform that represents a decrease or drop in voltage from a baseline
How to use "negative pulse" in a sentence
Basic
Advanced
negative pulse
The final pulse should be a negative pulse.
Another negative pulse does not change this new state.
A disease that affects the flow blood and cause negative pulse.
Negative pulse stuffing.
The same applies to the absolute value of the negative pulse potential.
The negative pulse width is preferably smaller than the positive pulse width.
It will be understood that the same elements are applicable for negative pulse signals.
This signal has a negative pulse corresponding to each pulse of the signals Vx and Vy.
Create a temporary codebook vector EPMATHMARKEREP and add a negative pulse at position k.
Further, the negative pulse width should preferably be less than the positive pulse width.
Negative voltage pulses are substantially trapezoidal in shape and have a negative pulse interval Tc.
The positive and negative pulse magnitudes were 40 volts.
This is a positive pulse, and this is a negative pulse.
A negative pulse is therefore applied,.
It would then merely be necessary to apply a negative pulse of a value of approximately 45 mA.
See also
The ( pulse ) width trigger acts directly on the duration of a positive or negative pulse.
Conversely, a negative pulse places switch 1 in the open state.
It then sends signals to transistors controlling the negative voltage, making a negative pulse.
Finally a second negative pulse leaves the cell in state ( a ).
Also, the positive pulse is illustrated to be of longer duration than the negative pulse.
There is a 2 microsecond negative pulse repeated every 7 microseconds five times.
Multiplexer 212 selects the signal flow to either generate a positive pulse or a negative pulse.
Set the signal height to 5 volts and a negative pulse width of 75 microseconds.
It may for example comprise a cycle of an AC waveform, i.e. a positive and negative pulse.
Thus a short duration negative pulse is produced at the output of the NAND gate 493.
It is assumed that at a time t 12, signal Vc has a negative pulse of short duration.
The negative pulse is then low ohmically rectified by the diode D10.
To switch off transistor Tp, a negative pulse is applied to winding W2.
The negative pulse width may be approximately twelve microseconds ( 12 µ sec ).
The pulse patterns included equal positive and negative pulse amplitudes of 40 volts D. C.
When the negative pulse ends, the microprocessor exits the program flow at step 490.
Width, The width of the first negative pulse in the 50 % amplitude points.
Negative pulse Neg-pulse 14 Half round function Half round.
In one example, the period of the negative pulse T is of the order of 220 nanoseconds.
In operation, a small negative pulse A1 is produced as shown in Figure 5A.
TTL level, negative Pulse width, more than 3H.
You'll also be interested in:
Examples of using Pulse
Show more
The pulse only lasts a couple of microseconds
I can not get a pulse on the doppler
His pulse and respiration are below normal
Examples of using Negative
Show more
Dissolution of etheric negative etheric or astral objects
Negative test results would also be recorded
Suitable for extended negative pressure service
