Examples of 'node-b' in a sentence
Meaning of "node-b"
node-b (adjective): Refers to a type of network device that serves as a connection point for other devices
How to use "node-b" in a sentence
Basic
Advanced
node-b
A base station may also be referred to as a Node-B.
The Node-B then compares the ratio to the threshold.
This protocol stack constitutes a lub interfaz with another Node-B.
In this case, the Node-B transmits the grant message indicating the retransmission.
This variant may necessitate some hardware changes at the Node-B modem.
However, the Node-B is typically unable to recognize whether a feedback information failure occurs.
Resource allocations for this channel are granted by a scheduler located in a MAC-hs entity in Node-B.
The Node-B needs to decide the offset which can be applied for both UEs.
This also prevents an increase of the device scale of the radio base station Node-B.
The Node-B checks the data transmitted from the UE.
Figure 4 shows a flowchart which illustrates the operation of code distribution module within node-B.
Node-B can do individual carrier scheduling or joint carrier scheduling.
The handover command may include the transparent container received from the target Node-B.
The WTRU is served by the designated Node-B for a particular coverage region.
This control is with the UE and the Node-B.
See also
If the Node-B transmits the grant message according to the embodiment of FIG.
The system includes at least one Node-B and at least one WTRU.
Node-B controlled carrier selection of the uplink transmissions will then be introduced.
It is thus usually called a base station, but in UTRA it is also called a node-B.
If the Node-B desires to change the ReTx timing to another as described in FIGS.
In general, each WTRU has a different propagation delay in a cell covered by a Node-B.
The Node-B may implicitly determine that the WTRU is in a power restricted state.
Statistical algorithms could be implemented in the node-B in order to tune the MBMS transmission.
The Node-B can easily recognize the signal contained in the RACH channel.
An exception may apply if an HICH transmission has failed on the primary serving Node-B.
The Node-B transmits a grant message including scheduling information to the uplink-scheduled UE.
Transmission of these combinations may also be allowed without requiring EU channel allocations from Node-B.
The Node-B transmits a grant message for the new data transmission to the selected UE.
The WTRU receives a message from the Node-B via the common control channel.
A Node-B may generate a value before deciding how and what resource to allocate to the UE.
The H-ARQ entity retransmits the data in accordance with a transmission feedback from the Node-B.
A Node-B for transmitting a packet vía HSDPA.
The WTRU reports perceived downlink channel quality by sending a CQI to the Node-B.
The Node-B monitors the UpPCH for detecting SYNC UL sequences transmitted from WTRUs.
Figure 4 is a simplified node-B for transmission power level estimation.
A Node-B receives a transmission including a SYNC UL sequence from a WTRU.
User data buffer multi-carrier split is performed at Node-B.
Alternatively, the Node-B may be configured to control a single frequency.
The method of claim 1, wherein the radio network includes a Node-B.
As a result, the Node-B can more efficiently allocate resources.
Further, only a single transport connection could be provided for one Node-B.
The Node-B of claim 23, wherein the physical downlink control channel is a common channel.
In the case of a UMTS-type system the base station is also referred to as node-B.
For example, Node-B 12 performs flow control of data communication based on the identification information.
The base station interfaz 55 is an interfaz for the radio base station Node-B.
This information is signaled whenever the Node-B 102 detects reception outside of a specified range.
Each Node-B is responsible for radio transmission in a predetermined sub-area ( cell ) of the service área.
A soft buffer is a buffer for implementing H-ARQ in a Node-B.
Alternatively, the Node-B may be informed implicitly by means of another IE.
To decide how to update the ASG the Node-B could exploit,.
