Examples of 'nominal impedance' in a sentence
Meaning of "nominal impedance"
Nominal impedance refers to the electrical impedance or resistance value that a device or component is designed to operate at under normal conditions. It is a standardized measurement used in electrical engineering, particularly in the field of audio systems and electronics. The nominal impedance value is usually represented in ohms and serves as a reference for specifying compatible equipment and ensuring proper electrical matching
How to use "nominal impedance" in a sentence
Basic
Advanced
nominal impedance
This is called the nominal impedance.
Nominal impedance of secondary circuit.
Each additional speaker you connect will drop nominal impedance by half.
Sets the nominal impedance of the load and increases performance.
Additional speakers connected to a single amplifier channel will drop nominal impedance.
Nominal impedance first started to be specified in the early days of telecommunications.
It is imperative that you identify the nominal impedance of the speakers PRIOR their connection.
The nominal impedance of systems consisting of a combination of PR.
The Satellite Left and Satellite Right outputs are designed for a nominal impedance of four ohms.
The nominal impedance of this speaker system is 6.
This speaker system has a nominal impedance of 8.
The nominal impedance of an enclosure is that measured at 1 kHz unless otherwise indicated.
Also you must enter the loudspeaker 's nominal impedance.
The nominal impedance of your enclosure will be clearly marked on the in-put plate.
However, this is only permitted if both loudspeakers have a nominal impedance of at least 8 Ω.
See also
What is the Nominal impedance and its low?
All speaker models in this series have a nominal impedance of 8Ω.
The nominal impedance of the speaker system is 6 Ω.
We recommend using loudspeakers with a nominal impedance of 4 ohms or higher with the RKB amplifiers.
The nominal impedance of the 8XTi enclosure is 8 ohms.
All loudspeakers must have a nominal impedance of at least 4Ω.
Nominal impedance 4 ohm.
Only use loudspeakers with a nominal impedance of at least 4Ω.
The outputs ' nominal impedance is 8 ohms, and impedance may not fall short of this value.
Power amplifiers can drive speakers with a nominal impedance range of 2-4 ohms.
A suggested nominal impedance for most data applications is 90 Ohms.
R ' 2 must be very much greater than the nominal impedance Zn of the transformer.
If the nominal impedance is 4 ohms, the voltage would be 2 volts.
Confirm the speaker 's nominal impedance value page 6.
Together they are rated at a 200-watt RMS power handling capacity and a nominal impedance of 4 ohms.
The most common nominal impedance for loudspeakers is 8 Ω.
Various connections possible due to a nominal impedance of 85 Ω.
The Nominal Impedance of your loudspeaker normally is 4, 6 or 8 ohms.
They support a maximum power of 130 watts with a nominal impedance of 6 ohms and have THX certification.
They are rated for 400 W RMS power handling capacity and a nominal impedance of 8 ohms.
Keep in mind that, minimum nominal impedance for each cannel is 4Ω.
The antenna port is designed for operating with a nominal impedance of 50 Ω.
You can use speakers with a nominal impedance between 4 and 16.
In the mid twentieth century, many audio lines had a nominal impedance of 600 Ω.
We recommend using loudspeakers with a nominal impedance of 4 ohms or higher with the RB-976.
This unit supports speakers with a nominal impedance of 4 to 16.
You can use speakers with a nominal impedance between 4 Ω to 16 Ω.
You can use speakers with a nominal impedance between 4 W and 16 W.
You'll also be interested in:
Examples of using Impedance
Show more
Speaker impedance ratings are less than precise
You can set the speaker impedance
Check the impedance of the connected speakers
Examples of using Nominal
Show more
It is nominal in a demographic decomposition but quantitative here
Catches are expressed as nominal catches in metric tonnes
The nominal thickness of the interlayer or interlayers
