Examples of 'nominal thickness' in a sentence
Meaning of "nominal thickness"
nominal thickness - This phrase refers to the minimal or insignificant thickness of something, implying that the thickness is very small or negligible
How to use "nominal thickness" in a sentence
Basic
Advanced
nominal thickness
The nominal thickness of the interlayer or interlayers.
Standard lower deviation on the nominal thickness.
The nominal thickness of the layer of glass.
Reduced lower deviation on the nominal thickness.
The nominal thickness of the glass pane.
Where e is the sheet nominal thickness.
Nominal thickness of glass pane e.
Normal tolerances for nominal thickness mm.
Nominal thickness of the windscreen.
Special tolerances for nominal thickness mm.
Nominal thickness of plastics coatings.
This minimum will then be established as a nominal thickness.
Tolerances on nominal thickness of individual sheets.
These measurements are expressed as a percentage of the nominal thickness.
Nominal thickness of plastic coatings.
See also
From the specified nominal thickness.
Nominal thickness of the layers.
Tolerances for a nominal thickness of.
Nominal thickness of the pane.
Preferred nominal thickness.
Nominal thickness of the gaps.
It applies to steel sheet and strip of a nominal thickness of less than.
Nominal thickness of the gap.
The permitted deviation from the nominal thickness within a single acceptance unit.
Nominal thickness of test piece.
The panel is maintained at a predetermined nominal thickness until the core slurry is hydrated.
Nominal thickness of the product.
Ensure there is sufficient space for the insulation to retain its nominal thickness.
The nominal thickness.
The value of the arithmetic mean shall not deviate from the nominal thickness.
Nominal thickness of interlayers.
Location, type and nominal thickness of deck.
Nominal thickness of interlayer s.
Normal tolerances for a nominal thickness of, mm.
Nominal thickness a w max.
Special tolerances for a nominal thickness of, mm.
Nominal thickness of leaf.
It was possible to make films with a nominal thickness of about 3 mils.
Nominal thickness mm.
Code number which is the nominal thickness of the topside coating in μπι ;.
It thus becomes possible to source only a sheet of limited nominal thickness e 3.
The selection of the nominal thickness is thus important in a production situation.
Each film is a five layer film with a nominal thickness of 4 mils.
The nominal thickness of the gap between the two glass panes.
They were then sectioned to a nominal thickness of µ, and mounted on glass slides.
The nominal thickness of the plastic interlayer sheet or sheets;.
They were then sectioned to a nominal thickness of 5µm, and mounted on glass slides.
The nominal thickness of the layer ( s ) of plastics material acting as interlayers.
The steps are approximately one-half a nominal thickness of the flange portion.
The nominal thickness of the cast sheet was 5 mil.
You'll also be interested in:
Examples of using Nominal
Show more
It is nominal in a demographic decomposition but quantitative here
Catches are expressed as nominal catches in metric tonnes
The nominal thickness of the interlayer or interlayers
Examples of using Thickness
Show more
Minimum recommended thickness of zinc vs thickness of steel
Thickness of tanks made with double walls
Reduction of wall thickness and additional protection
