Examples of 'not be bent' in a sentence
Meaning of "not be bent"
This phrase means to not be easily influenced or swayed. It implies that someone is firm in their beliefs or principles and cannot be easily convinced otherwise
How to use "not be bent" in a sentence
Basic
Advanced
not be bent
The hose should not be bent or compressed.
Laws concerning firearms are serious and should not be bent.
The cable must not be bent or compressed.
Glass fiber cables must not be bent.
And will not be bent by time.
Indeed beliefs should not be bent.
Amulet must not be bent or crooked.
None can turn away and not be bent.
It should not be bent and should be left to drain dry.
The hose must not be bent.
It should not be bent and should be left to dry before being refitted.
The power cord must not be bent or squashed.
Sure the back of unit and the cable must not be bent.
The cable must not be bent or pressed.
Normally, the tabs on the remote controller should not be bent.
See also
Batten strips should not be bent around corners.
Normally, the tabs on the remote control unit should not be bent.
The mains cable must not be bent or squeezed.
You can simulate a black hole in a computer, but space-time will not be bent.
Needles should not be bent or sheared.
It was super-lightweight but extremely strong and could not be bent or burned.
Coax should not be bent sharply.
The ends of the rear protective device must not be bent backwards.
The meaning must not be bent to conform to a particular doctrinal understanding.
The connection cables must not be bent or crushed.
Wall ties shall not be bent after being embedded in grout or mortar.
All the connecting cables must not be bent or squeezed.
Blades must not be bent and the edges must not be damaged.
The cuff line should not be bent sharply.
Optical fibres must not be bent below a certain minimum bend radius.
The woman 's legs will not be bent.
Connection cables may not be bent excessively, pulled, or stressed mechanically.
Also, the cable must not be bent.
His arms and legs could not be bent from their locked position.
The power supply cable must not be bent or compressed.
The cable should not be bent or compressed .!
Look at the wood of the bow, it should not be bent downward or upward.
When rolled up the vinyl should not be bent sharply - it should be on rolls.
The electric cord must not be bent or crushed .!
