Examples of 'not energized' in a sentence
Meaning of "not energized"
not energized: 'Not energized' means that something lacks energy, power, or activation. It can refer to an object, system, or individual that is not functioning at full capacity or is inactive. In a metaphorical sense, it can also describe a person who feels tired, unmotivated, or uninspired
How to use "not energized" in a sentence
Basic
Advanced
not energized
Relay coil is not energized at alarm or power off.
The solenoid valve is not energized.
If the light is not energized the ice machine will not make ice.
The coil is therefore not energized.
Phase B is not energized and has no electromagnetic pole.
The cutting element is not energized.
The lamp is not energized by the antenna, indicating gas has escaped from the lamp.
Activate electrical system or branch circuits that are not energized.
One phase not energized.
The craft sits on its belly when its not energized.
In these solutions, the latch is not energized to switch to a stable position.
The inductors that are not covered by the load are preferably not energized.
The heating element 3 is not energized during this phase.
All the transistors are turned off and the relay is not energized.
There is no known load, the coil is not energized and there is no communication.
See also
This is the ONLY way to be sure components are not energized.
The solenoid valve SV3 is not energized and is therefore closed.
If a coin is to be rejected, the electromagnet is not energized.
Fuel injectors are not energized by this test . From the On Demand Tests Menu.
At least one intermediate inductor that is covered is not energized during the heating step.
Coil 64 is not energized due to the break in auxiliary circuit 52 formed by insulating gap 68.
Practitioners believe that a yantra that is not energized with mantra is lifeless.
The normally-closed contacts NC conduct electricity when the relay coil is not energized.
In this case the hydro-motor 12 is not energized and only the brush is driven.
Normally, the electronic alarm circuit is not energized.
Above this speed the solenoid 110A is not energized and the circuit remains always incomplete.
In said recording operation, the bias magnet is naturally not energized.
Thus, coil 3 is not energized and switch 2 is open.
In sensor mode, the coils are not energized.
The stores are not energized and not shop-able . ”.
Drop bolt lock, locked when not energized.
When the selector rod is not moved, the solenoid is not energized.
Relay RL 2 is then not energized.
If sufficient power is not available, flashlight 30 is not energized.
The second electromagnetic coils 164 are not energized in this state.
Mechanically locked in “ open ” position when electromagnet is not energized.
White " Power " light not energized.
Until the vehicle 10 arrives at each cell, the electromagnets are not energized.
Windings of the C-D pole pair are not energized.
Thus, the cam remains in one of these positions when he motor 32 is not energized.
The clutch remains engaged and the brake is enabled but not energized in time period T10.
This position is the " rest " one of the electrovalve, the electromagnet being then not energized.
The electric motor 3 is not energized.
FIG . 5 shows an electro-valve in a position where the coil of the electro-magnet is not energized.
Amplifier is OFF, relay is not energized.
Switch 5 is opened and scanning circuit 2 is not energized.
If no sender of the vehicle is over loop 62 relay RL 1 is not energized.
The correct indication on voltmeter is 0 volts DC when “ E ” valve is not energized.
Contact C 3 is open when relay RL 1 is not energized.
In this position, the coil 35 is not energized.
You'll also be interested in:
Examples of using Energized
Show more
Green bank energized lights illuminate on the
Do not clean or maintain while fixture is energized
The actuator is then energized by a control unit
Examples of using Not
Show more
I am not really sure what that thing was
Use where walls are not perpendicular to base
I am not saying that you do not care
