Examples of 'nozzles' in a sentence
Meaning of "nozzles"
Nozzle is a noun referring to a projecting spout, pipe, or tube used to control the flow or direction of a liquid or gas
Show more definitions
- plural of nozzle
How to use "nozzles" in a sentence
Basic
Advanced
nozzles
Pressurized spray nozzles provide effective cleaning.
Nozzles should be locked if hoses are left unattended.
Keep the other nozzles inaccessible to children.
Nozzles are available in different sizes and forms.
Always keep nozzles and vacuum open.
Nozzles are screwed into the heating unit.
Check that the nozzles are not blocked.
Nozzles in spray arm are blakcked by remnants of food.
Install dust nozzles and dust attachment.
Nozzles and suction tubes must not.
Work on burner nozzles may only be done by experts.
The models can include different nozzles.
Spray nozzles blocked with mineral buildup.
Output of irrigation nozzles volume per minute.
Clean nozzles after prolonged periods of nonuse.
See also
Remove the spray nozzles once a week.
Special nozzles are available for special tasks.
Check that the spray nozzles are clean.
Wait for nozzles to cool before changing.
Look for obstruction in the spray nozzles.
The suction nozzles can be replaced easily.
Check and clean spray arm nozzles.
Modern nozzles with rounded rear edge.
Turn engine off before changing nozzles.
Old nozzles with sharp rear edge.
From the suction nozzles of the device.
The nozzles become hot during operation.
Supersonic expansion nozzles molecular based methods.
The nozzles are made from ideal materials.
Use low angle nozzles when feasible.
They can clog the air nozzles.
Check that the nozzles are not obstructed.
Your shower has six power nozzles.
Do not soak nozzles in chlorine solution overnight.
Only change suction nozzles when hot.
These nozzles are shown in the table on burners.
Carefully clean the nozzles to prevent damage.
Rated nozzles deliveries are listed on the table.
Replacing or attaching the supplied attachment nozzles.
Never clean nozzles with hard objects.
Remove the high pressure nozzles and.
Clean the nozzles with the brush.
Fitting quick connector accessories and nozzles.
Turn the suction nozzles clockwise to lock.
Infusion at the face by means of multiple nozzles.
Two hinged nozzles were set on the frame.
There is no need to remove the injector nozzles.
The injection nozzles adjust the fuel.
Follow these instructions to change ProjectPro nozzles.
Make sure the nozzles are pointed backwards.
