Examples of 'octave band' in a sentence
Meaning of "octave band"
octave band: This term refers to a range of frequencies in the audio spectrum that spans one octave. It is commonly used in audio engineering, acoustics, and music production to classify and analyze sounds based on their frequency content within a specific octave range
How to use "octave band" in a sentence
Basic
Advanced
octave band
Octave band analysis upon request.
For workplace noise we need octave band analysis.
Each octave band is identified by its center frequency.
Center frequency of each one third of octave band.
Third octave band filter.
All the results are given in third octave band.
A number of five sensors per octave band proves to be sufficient.
Where coefficients ai and bi are given for each octave band.
Octave band spectrum analyser measurement mode Optional.
LT f Equivalent continuous sound pressure level with or without A frequency weighting for octave band f.
Each octave band is subdivided into three one-third octave bands in logarithmic manner.
Measurement at 1 m directly in front of horn dB pe r octave band.
Is the one-third octave band wavelength spectrum of the corrected acoustic rail roughness ;.
No valid measurement of one-third octave band results.
The frame and one-third octave band indices are omitted for notational convenience.
See also
Background compensation is not permitted for one-third octave band measurements.
Octave band roughness level, dB.
Measurement at 1 m directly in front of horn dB per thirds band dB per octave band.
Table 1.2 below shows adjustments to octave band centre frequencies.
Then, an one-third octave band analysis is performed by grouping DFT-bins.
The criteria is normally specified as levels for each 3rd octave band.
An example of NR curves with 1/1 octave band noise measurements plotted on top.
It had however, not been possible to reduce the vibration in every octave band to.
No valid measurement of one-third octave band results Conduct measurement according to 3.3.
Table 5 Sound pressure levels of travelling block crane dB per octave band.
Sound insulation in dB per octave band of cab walls of Cockerill loco loco 54.
The overall reduction is 5 to 8 dB per octave band.
Sound pressure levels in dB per octave band on loco 98 General Electric.
For example, equal power is any one-third octave band.
The ISO octave band method predicted higher thresholds than the 1/3 octave and Design Window methods.
The top line of each row represents the ⅓ octave band center frequency.
Electroacoustics - octave band and fractional-octave-band filters.
This “ pre-shaping ” is not achievable using ordinary third or octave band equalizers.
Octave/Third octave band analyser.
Sound pressure levels of travelling diesel-electric (Baumet Marpent) locomotive dB per octave band.
Tendency curves with 1/3 octave band tendency analyzer.
Also measures reverberation time in 1/3 octave band.
The sound absorption coefficient at 1/3 octave band centre frequencies, measured in accordance with ISO 354.
The peak frequencies were generally in the 125 Hz octave band.
Ii Errors which are made in 1/3 octave band frequency analysis.
Table 6 Sound pressure levels of travelling diesel-hydraulic (Cockerill) loco, dB per octave band.
Table 10 Sound pressure levels in dB per octave band on loco 54 Cockerill.
Table 1.2 Octave band centre frequency adjustments for A - and C-weighting curves.
These sound power levels are calculated for each octave band i from 125 Hz to 4 kHz.
Total noise levels Octave band [ Hz ] Pow.
You'll also be interested in:
Examples of using Band
Show more
Select frequency band and radio station
My band was supposed to perform in the festival tonight
They are inside the band today they are going in
Examples of using Octave
Show more
A full octave higher than the score
Acoustic insulation in one third octave bands
Octave of girls play better than men
