Examples of 'off the tool' in a sentence
Meaning of "off the tool"
off the tool is a term commonly used in manufacturing or engineering industries. It refers to a product or component that has been completed or produced using a specific tool or machine. Once off the tool, the item is considered finished and ready for use or further processing
How to use "off the tool" in a sentence
Basic
Advanced
off the tool
Always switch off the tool before.
Turn off the tool by pressing the main switch.
Then switch off the tool.
Dry off the tool before use.
And take the head off the tool.
Always switch off the tool before installing or.
Pull the front part off the tool.
Always switch off the tool before insertion or.
Pull the whole assembly straight off the tool.
Motor cuts off the tool stops.
Always clean dust and dirt off the tool.
Switch off the tool and disconnect the.
Beware that after switching off the tool the.
Always switch off the tool before insertion or removal of.
Release the guard and take it off the tool.
See also
Always switch off the tool before installation or removal.
It is dangerous to place the tool before turning off the tool.
Always switch off the tool when work is finished.
Check out how the material files off the tool.
Always switch off the tool before installing or removal of.
There is also a couple of videos showing off the tool in action.
Always switch off the tool when work is fi nished.
Remove the pins and take the guard off the tool.
Turn off the tool and unplug it before any adjustment.
Pull the depth gauge off the tool toward the front.
Turn off the tool and disconnect from power source.
Pull the dustbag or deflector to the rear and off the tool.
Immediately switch off the tool if the saw blade is jammed.
The springloaded mechanism will push the battery pack off the tool.
Switch off the tool and then press in the restart.
Overload protection automatically turns off the tool when the motor is overloaded.
Switch off the tool and insert the battery cartridge.
Do not attempt to free a jammed blade before first switching off the tool.
Always switch off the tool and remove the battery.
Backwards and pull the dust protector cap off the tool holder.
Switch off the tool and remove the battery cartridge.
The slurry turns brown from bits of copper ground off the tool.
Immediately switch off the tool if any of the following occurs.
It may run too fast and cause the accessory to be thrown off the tool.
Switch off the tool after the bar and chain.
In the event of an emergency, switch off the tool.
Switch off the tool before changing the operation mode.
After finishing work, always switch off the tool.
Switch off the tool and take out the battery pack.
To convert for maintenance edging, turn off the tool.
Always switch off the tool before insertion or removal of the battery.
To change the speed, switch off the tool first.
Switch off the tool in the position posed when finishing a cut.
With shear blades open, switch off the tool.
Switch off the tool and let it cool down to room temperature.
You'll also be interested in:
Examples of using Tool
Show more
The tool is intended for blowing debris
Have your power tool ser v iced by a
Tool operates erratically or appears to be losing power
