Examples of 'ohm load' in a sentence
Meaning of "ohm load"
ohm load: In the context of electronics or audio systems, 'ohm load' refers to the impedance or resistance that a speaker or amplifier presents to the electrical current. It is an important consideration for matching components to ensure optimal performance
How to use "ohm load" in a sentence
Basic
Advanced
ohm load
MaxRatedPL is the maximum rated power of the amplifier into a two ohm load.
Not all amplifiers are stable into a 2 ohm load especially in bridged mode.
A parallel configuration allows the use of two speakers per channel for a 4 ohm load.
Do not transmit without a suitable antenna or 50 Ohm load connected to the antenna connector.
When bridged, each channel pair will deliver optimum power into a single 4 ohm load.
Ohm load to ground at each output ;.
Treble amplifier power with an 8 Ohm load.
Warning, Note the minimum 4 ohm load for this connection.
Furthermore, a reference load is used, which can be an antenna or a ohm load.
The L7 subwoofer enclosures are internally wired for a 2 ohm load at the speaker-wire connection terminal.
When bridged, each channel will deliver optimum power into a 4 ohm load.
A 150 ohm load was used for the matching conditions.
Now we can easily found the required current through 2 Ohm load resistance by Ohm 's law.
Two external 4 ohm speaker cabinets would provide the recommended 2 ohm load.
A great match at a 2 ohm load.
See also
The test level can be defined as the equivalent current into a 150 ohm load.
Disconnect the antenna from the dongle and ideally replace it with a 50 ohm load.
Panel 4 shows a biphasic waveform with the same constant tilt with a 25 ohm load.
Panel 2 shows a conventional biphasic waveform with the same duration of phases with a 25 ohm load.
Bass amplifier power with an 8 Ohm load.
With coils wired in series, a dual 4 Ohm speaker will present an 8 Ohm load.
Keep in mind that two 8 Ohm parallel linked speakers will equal a 4 Ohm load.
With speakers wired in parallel, Two 4 Ohm speakers will present a 2 Ohm load.
Panel 3 shows a constant tilt biphasic waveform with a 50 ohm load.
Thus, the radio frequency energy is absorbed by the 50 ohm load.
For example, when driving two pair of 8 ohm speakers, the amplifier sees a 4 ohm load.
For example, when driving two pair of 8 ohm speakers, the amplifi er sees a 4 ohm load.
DBu Decibels referred to the voltage equivalent of 0 dBm into a 600 ohm load.
