Examples of 'oil drain plug' in a sentence
Meaning of "oil drain plug"
Oil drain plug: A device used to drain the oil from a vehicle's engine. It is typically located at the bottom of the oil pan. This plug needs to be removed in order to drain the old oil before a new one can be added
How to use "oil drain plug" in a sentence
Basic
Advanced
oil drain plug
Install oil drain plug and tighten.
Clean area around oil drain plug.
Remove oil drain plug and washer.
I also installed a magnetic oil drain plug.
Unscrew the oil drain plug and remove.
Place a container under the oil drain plug.
Reinstall oil drain plug and tighten securely.
Be careful not to overtighten the oil drain plug.
Replace oil drain plug and tighten securely.
To drain lubricant from the oil drain plug.
Remove the oil drain plug and dipstick.
Check for loose fasteners including oil drain plug x.
Find an oil drain plug in the right size.
The oil fill cap or oil drain plug.
Install oil drain plug and tighten with a wrench.
See also
Engine coolant and oil drain plug closed.
Remove oil drain plug and drain oil completely into a.
Screw in the oil drain plug.
Install oil drain plug and tighten until snug.
Place a container under the oil drain plug to be removed.
Remove oil drain plug and drain oil into appropriate receptacle.
Remove the oil drain plug.
Completely drain lubricant by removing the oil drain plug.
Transmission oil drain plug gasket.
It should be facing downwards next to the oil drain plug.
Screw in the oil drain plug and seal ring.
Unscrew the oil filler plug and the oil drain plug.
Install the oil drain plug and tighten securely.
Place an approved recyclable oil container under the oil drain plug.
Clean area around brass oil drain plug at bottom of.
Open the oil drain plug and let oil drain completely into a.
Replace and tighten the oil drain plug and washer.
Remove oil drain plug from engine and oil fill plug or dipstick.
Clean area around the brass oil drain plug at the bottom of the pump.
Remove oil drain plug and drain oil completely into a suitable container.
Remove the oil filler cap and oil drain plug to drain the oil.
Remove the oil drain plug when the diesel engine is still hot.
Drain tank to release air pressure before removing the dipstick or oil drain plug.
Now install the oil drain plug again tighten.
Locate a suitable container under oil drain plug D.
Remove the oil drain plug and crush washer.
Place a container under the pump oil drain plug CC.
Reinstall the oil drain plug and crush washer.
The oil must be drained from the oil drain plug P.
Open the oil drain plug and pour the warm.
After oil is drained, replace oil drain plug.
Reinstall the oil drain plug and refill engine with clean.
After oil has drained completely, reinstall oil drain plug.
Remove the oil drain plug and drain the old oil.
Clean area around oil fill, and oil drain plug.
You'll also be interested in:
Examples of using Plug
Show more
Plug the machine into a suitable outlet
Put the small plug in the appliance
Plug the charger into proper outlet
Examples of using Drain
Show more
Leave it to drain on the half moon insert
The washing machine does not drain or spin
There is a drain pump in the ice machine
Examples of using Oil
Show more
Check oil level and fill if needed
Directions for observation with oil immersion
Use olive oil instead of grapeseed oil
