Examples of 'oil gauge' in a sentence
Meaning of "oil gauge"
oil gauge: An oil gauge is a device used to measure and indicate the level of oil in an engine or machinery, ensuring proper lubrication and functioning
How to use "oil gauge" in a sentence
Basic
Advanced
oil gauge
Keep a close eye on that oil gauge.
Replace the oil gauge and screw in firmly.
Regularly check your oil gauge.
Oil gauge is not visible in oil sight glass.
No problem with the oil gauge.
Of the oil gauge will lead to oil leakage.
Just before no oil is visible in the oil gauge window.
Keep the oil gauge free from dust or dirt.
This is the oil gauge.
Remove the oil gauge and check the oil level.
Add oil to pressure pump if level is below indicator on oil gauge.
Keep the detached oil gauge free of sand or dust.
The oil level must be between the two oil gauge marks.
Reinsert the oil gauge back into the oil fill gauge opening.
Be sure to add more oil if the oil gauge is below the.
See also
Do not screw the oil gauge into the oil filler neck to check oil level.
Be careful not to lose the rubber packing attached below the oil gauge.
Clean area around the oil gauge before removing it.
Take care not to lose the rubber sealing attached below the oil gauge.
Insufficient tightening of the oil gauge will lead to oil leakage.
Check the contents of the oil tank during sawing work by checking the oil gauge.
Check also that the chain lubrication and the oil gauge are in good working order.
Before commencing work, check the automatic chain lubrication and oil gauge.
The oil Gauge.
FullUP is not just a connected oil gauge.
Prior to feeding oil, remove the oil gauge using the provided hexagon bar wrench.
In all of my years of flying I would never seen an oil gauge read zero.
Remove the oil gauge ( A ) to check the oil level.
After feeding oil, securely clamp the oil gauge.
Remove the oil gauge ( A ) and wipe it with a clean cloth.
Keep the engine level, and detach the oil gauge.
Remove oil gauge and refill with new oil . Fig . 7.
After filling with oil, securely clamp the oil gauge.
If I take the oil gauge out, it 's dry.
Otherwise, any sand or dust adhering to the oil gauge may cause.
Before feeding oil, use the provided wrench to remove the oil gauge.
The vehicle 's manual will show you where the oil gauge is on your engine.
Remove dust or dirt near the oil refill port, and detach the oil gauge.
Down under the lower marker line when observing the oil gauge from sideward, supply oil.
Pour the oil slowly to “ FULL ” mark on the oil gauge.
Instruments consisted of a speedometer, clock, oil gauge and ammeter.
Weekly check oil level, using oil gauge.
Add the oil until the oil level ( see oil gauge 2 ) reaches H.
You'll also be interested in:
Examples of using Gauge
Show more
And gauge how we might come together
Slide the depth gauge rod backward
Pressure gauge to detect blockage of secondary filter
Examples of using Oil
Show more
Check oil level and fill if needed
Directions for observation with oil immersion
Use olive oil instead of grapeseed oil
