Examples of 'oil or grease' in a sentence
Meaning of "oil or grease"
Oil or grease" pertains to lubricants used in machinery or mechanical systems to reduce friction, heat, and wear between moving parts.
How to use "oil or grease" in a sentence
Basic
Advanced
oil or grease
Do not use oil or grease on the equipment.
The motor never needs oil or grease.
Do not add oil or grease while grilling.
Never lubricate regulators with oil or grease.
Never leave hot oil or grease unattended.
Oil or grease in sample gas lines or couplings.
Do not leave overheated oil or grease unsupervised.
Do not oil or grease plastic wheel bearings.
Sprag clutches may be oil or grease lubricated.
Remove oil or grease with a suitable diluted detergent.
Never lubricate cylinder valves with oil or grease.
Do not use oil or grease on this device.
Remove and wipe off excess oil or grease.
Do not apply oil or grease to the thread.
Oil or grease stains are also indicated as warning signs.
See also
Do not attempt to extinguish an oil or grease fi re with water.
A type of oil or grease especially formulated to lubricate gears.
Lubrication is achieved with oil or grease.
Never use oil or grease on electrical contacts.
Bearing lubrication is usually either light oil or grease.
Do not use oil or grease as a lubricant.
My hand cycle chain was yelling for oil or grease.
Apply machine oil or grease on to the blade tight.
Device for separating water from oil or grease.
Do not apply oil or grease to the metal parts.
Do not use any type of skin oil or grease.
Do not apply oil or grease on the sliding surface of.
The lubricant may be an oil or grease.
If any oil or grease is stuck to the connector and.
Remove any oil or grease.
Oil or grease in the presence of high pressure oxygen is explosive.
Make sure that no oil or grease touches the tyres.
Oil or grease is easily ignited and is extremely volatile in the.
Wipe away any oil or grease with a clean cloth.
Oil or grease that has been spilt should be cleaned immediately.
A protective oil or grease composition.
Keep the handles dry and free of oil or grease.
Applying oil or grease to lug nuts and bolts is dangerous.
Do not lubricate the magazine attachment with oil or grease.
Do not allow oil or grease to drop onto the blade.
The material to be cut must always be free of oil or grease.
Do not oil or grease the contact plates and contact pins.
Do not attempt to extinguish an oil or grease fire with water.
Use a little oil or grease to extend the lifetime of the cord.
Never attempt to extinguish an oil or grease fire with water.
Remove any oil or grease on the wheel bolts or wheel nuts.
Never lubricate cylinder valves or regulators with oil or grease.
Check whether oil or grease is between belt and drum motor.
Under no circumstances should you oil or grease the motor.
Clean off any oil or grease with a alcohol base solvent.
You'll also be interested in:
Examples of using Oil
Show more
Check oil level and fill if needed
Directions for observation with oil immersion
Use olive oil instead of grapeseed oil
