Examples of 'oil plug' in a sentence
Meaning of "oil plug"
oil plug ~ a threaded component used to seal the opening of an oil pan or reservoir in a vehicle engine, preventing oil leaks and contamination. It is an essential part of routine maintenance and repairs for automobiles
How to use "oil plug" in a sentence
Basic
Advanced
oil plug
Remove upper oil plug on side of transmission.
Open the release valve and remove oil plug.
Screw on the oil plug firmly by hand.
The level in the gearbox is checked by unscrewing the oil plug.
Remove pump oil plug and fill with.
Refill new engine oil up to the lower edge of the oil plug.
Replace pump oil plug and tighten securely.
The new oil is filled through the hole where the oil plug sits.
Remove oil plug from right side of sander.
Remove the oil plug cap.
The oil plug that forms will be shot upwards by the gas.
Do not reuse oil plug gasket.
The oil plug is fitted with a magnet that captures metal particles.
Check that the gasket on the oil plug of the rear axle is intact.
Tighten oil plug securely each time you check the oil level.
See also
Wait for one minute after the unit is at standstill before opening the oil plug.
Replace the oil plug and tighten securely.
In this case, fill with oil up to the oil plug stick.
Unscrew the oil plug of the filler neck by hand.
To empty the engine oil, unscrew the oil plug 1.
Wipe the oil plug clean and screw it back.
With the wrench provided, turn the oil plug counterclockwise to.
Fasten the oil plug cap and mount the cover again.
Depending on which engine model you have, the oil plug may be positioned differently.
There is an oil plug for draining the oil located on the cutting arm.
Tell Clive that his oil plug is leaking.
An oil plug located on the side of the engine may not be properly tightened.
Once oil is completely drained, reinsert oil plug and return the machine to a level position.
Remove red oil plug on top of pressure washer and replace with dipstick supplied.
And you made sure that oil plug is tight, right?
Unscrew the oil plug on the filler neck by hand with the air end depressurized.
The delivery includes the oil plug and the related T50 Torx wrench.
Open oil plug item 4 and pour in oil from oil ampul in the machine box.
Remove the oil plug from the rear axle.
The oil plug will be damaged if it is tightened more to than 5 Nm.
Remove pump oil plug and fill with pump oil.
Remove the oil plug ( A ) and drain the oil until it slows to a drip, then close.
My oil plug.
Remove the oil plug from the oil tank A.
Remove the oil plug / dipstick from the crankcase Fig . 8.
