Examples of 'oil see' in a sentence
Meaning of "oil see"
This phrase is used to express the act of looking or searching for oil. It refers to the exploration or investigation of potential oil reserves or sources
How to use "oil see" in a sentence
Basic
Advanced
oil see
Pour in engine oil see engine manual.
Oil see user instructions for the correct amount.
Add the recommended oil see page.
Grade of oil see the motor manual Oil capacity.
Change the engine oil see page.
Transmission oil see the Maintenance Booklet.
To change engine oil see fig.
Recommended Oil See engine instruction manual.
Refill the crankcase with the specified amount of the recommended oil see page.
Add the recommended oil see pages and.
Reinstall and tighten the drain bolt and refill with the recommended oil see page.
Check engine oil see fig.
If low, add oil see enclosed Engine Owner 's Manual for details.
If necessary add engine oil see the engine manual.
Drain engine oil see chapter Cleaning and Maintenance.
See also
The fine flour was mingled with oil see also Lev.
Change the engine oil see Changing Engine Oil section.
Always purchase and use products labeled Hydraulic Oil see Specifications.
Drain the engine oil see § Changing the engine oil.
The frying basket will be lowered into the oil see figure 3.
Change the oil see “ changing the engine oil “.
If the buzzer sounds, stop the engine and add oil see page.
Refill with the proper recommended oil see the Engine Oil Recommendations section.
Fill engine crankcase with recommended oil See page 3.
Refill with engine oil see “ Initial Operation ”.
Laser printers and copiers which use fuser oil See page 2.
Change the oil see Changing Engine Oil on page 27.
Remove deposits with a brush and apply a thin film of oil see Figure 9.
The engine is filled with engine oil see Checking Engine Oil on page 28.
Lightly lubricate the oil filter gasket with fresh, clean oil see Figure 11.
Fill engine with oil See “ ADD OIL ” in the Operation section of this manual.
Replace the engine oil see page 5.
The future production profile is increasingly dominated by Dar oil see Figure 87.
Fill the pump with new oil see Technical data.
The hose size is matched to the flow of oil see page 50.
Should you need to re-order the special oil see “ SPECIAL ACCESSORIES ”.
Squeeze the filters to remove any excess oil see Figure 34.
Check the transmission oil see page 36.
AIR FILTER Clean the filter and wet it with oil see page 48.
Stand the equipment level and refill the engine oil see “ initial operation “.
Check the level and condition of the engine oil see p . 29.
Mix 25 parts gasoline with 1 part specified 2-stroke engine oil see table on right.
Use only recommended engine oil See page 13.
Mix 50 parts gasoline with 1 part MAKITA 2-stroke engine oil see table on right.
Mix 25 parts gasoline with 1 part DOLMAR 2-stroke engine oil see table on right.
Mix 50 parts gasoline with 1 part MAKITA 2-stroke engine oil see also table on the right.
Mix 50 parts gasoline with 1 part DOLMAR 2-stroke engine oil see also table on the right.
If oil level is at “ I ” or below, add recommended oil see “ Adding Engine Oil ”.
