Examples of 'oil sump' in a sentence
Meaning of "oil sump"
An oil sump is a reservoir located at the bottom of an engine that holds the oil necessary for lubricating its parts. This phrase is commonly used in the context of automotive or mechanical discussions, particularly when referring to the maintenance or repair of vehicle engines
How to use "oil sump" in a sentence
Basic
Advanced
oil sump
Clean the oil sump y with a cloth.
Underneath the radiator and oil sump.
Oil in the oil sump or a similar location.
Back into the oil sump.
The oil sump is located at the lowest point.
Open the oil sump cap.
The oil sump was dented and crushed during impact.
A multifunctional oil sump was introduced.
Automatic transmission oil sump.
A fifth pump in the oil sump directly supplies the lubricating points in the engine.
The various engines have different oil sump capacities.
A structural bulkhead in the oil sump contributes to improving rigidity and supplying more power.
Returns to the oil sump.
The lower half forms an oil sump and carries the oil pumps and filters.
The plane contact block is designed for the oil sump.
See also
The spindle is submerged in an oil sump in the lower housing section.
Engine lubrication uses an oil pump which is located inside the oil sump.
Gasket for oil sump.
The oil temperature shall be measured at the drain plug or in the oil sump.
Use a cloth to wipe the area around the oil sump i and duster chute o clean.
Snap the small end of oil drain sleeve onto the oil sump.
Version without oil sump Version with oil sump.
Lubrication of the movable parts is preferably provided by an oil sump in the crankcase.
Fill oil sump with recommendedoil and replacethe oil fill plug . See " Before Startingthe Generator " for oil recommendations.
They will leave their own as they have bust the oil sump.
For example, this could be an oil sump in the compressor.
The oil then flows through the bearing and back into the oil sump.
The oil thus separated is sent into the oil sump 6 via the return line B.
Four oil pumps transport the oil from the cylinder heads directly into the oil sump.
The combination of diesel engine 1 and oil sump 2 thus has a modular structure.
Example Determination of the temperature of the oil in an oil sump.
A numeral 58 designates a recess for oil sump formed in the inner surface of the bearing plate 27a.
Wait a few minutes until the engine oil flows back into the oil sump and remove.
Do not fill the oil sump beyond the " FULL " mark on the dipstick.
GUARD PLATE underneath the radiator and oil sump.
Oil sump with oil sensor hole and cover O.E. M.
Having said that, do not overfill the oil sump either.
The oil sump 80 communicates with the non-filtering part.
Excess lubrication passes through the longitudinal conduit in shaft 34 and returns to the oil sump.
To tyres, wheels, oil sump and clutch.
Self-lubricating gear in oil sump.
The suction manifold 34 communicates with the oil sump 32 or directly with a suction line ( not shown ).
Excess oil passes through longitudinal conduit 46 and returns to the oil sump.
These objectives are achieved, and other advantages gained, with an oil sump according to claim 1.
The oil pressure regulator valve 156 directs excessive oil back into the oil sump.
Valve cover, oil sump.
The guiding tube 2 stretches out to the crankcase part where the oil sump 10 is.
A cover, generally indicated 7, is fixed to the oil sump 4 by means of screws 6.
The crankshaft 30 is rotatably disposed internally in the compressor 10M and extends through the oil sump 32.
Same as B2A but with straight riser in oil sump and -32 carburetor.
You'll also be interested in:
Examples of using Sump
Show more
Clean the oil sump y with a cloth
Sump pump system if not already available
The equivalent of a sump on a boat is the bilge
Examples of using Oil
Show more
Check oil level and fill if needed
Directions for observation with oil immersion
Use olive oil instead of grapeseed oil
