Examples of 'oil to drain' in a sentence
Meaning of "oil to drain"
{"oil to drain": "This phrase may refer to the process of removing oil or lubricants from a machine, engine, or container, typically for maintenance, cleaning, or disposal purposes. It implies draining the excess or used oil to ensure proper functioning or to prevent environmental pollution.",}]
How to use "oil to drain" in a sentence
Basic
Advanced
oil to drain
Just waiting for the oil to drain.
Allow oil to drain into oil pan or container.
Stop the engine and allow oil to drain into.
Allow the oil to drain completely.
Allow ample time for all oil to drain out.
Allow the oil to drain out of the gear housing.
Allow time for the genset oil to drain completely.
Allow the oil to drain completely into an appropriate container.
Allow time for the engine oil to drain completely.
Allow the oil to drain completely into the tray.
Elevate one side of the engine to allow oil to drain out.
This allows the oil to drain quickly and completely.
It may take a few minutes for all the oil to drain out.
Allow all the oil to drain out of the pans.
Tilt the tiller slightly forward and allow all of the oil to drain.
See also
Minutes for the oil to drain back into the oil.
Hold the oil port hole over a suitable container to allow excess oil to drain.
Allow the fat and oil to drain off each other.
Remove the filter by pulling it from the engine and allow the oil to drain.
Remove drain plug and allow oil to drain into a suitable container.
Remove the filler and drain plugs and allow the oil to drain out.
That allows the compressor oil to drain back into the compressor.
During tightening, the drain valve opens allowing the used oil to drain.
Allow all oil to drain through the frame hole into the pan.
Wait a few minutes to allow the oil to drain back to the oil pan.
Allow the oil to drain from the oil fill tube into an appropriate container.
Tip mower onto its side and allow oil to drain from the oil.
Gravity forces the oil to drain into the lower well where it is produced.
Drain the oil into the container ; allow several minutes for oil to drain out completely.
This allows oil to drain back into the compressor, increasing its life.
When loosened, allows engine oil to drain from generator.
Allow the oil to drain into the catch basin - tilting the compressor toward the.
Remove the oil cap . Removing the oil cap allows the oil to drain easily.
Allow the used oil to drain completely ; then reinstall the drain plug and new washer.
Remove the Drain Plug, allowing the oil to drain into the container.
Allow the oil to drain into a container for at least 10 seconds.
Open oil drain valve ( AC ) and allow oil to drain completely.
To allow the oil to drain out easier, run the engine for about 3÷5 minutes.
A series of openings 80 in the outer casing allow oil to drain out into the sump 81.
You'll also be interested in:
Examples of using Drain
Show more
Leave it to drain on the half moon insert
The washing machine does not drain or spin
There is a drain pump in the ice machine
Examples of using Oil
Show more
Check oil level and fill if needed
Directions for observation with oil immersion
Use olive oil instead of grapeseed oil
