Examples of 'open collector' in a sentence
Meaning of "open collector"
open collector - In electronics, an open collector refers to an output circuit configuration where the collector terminal of a transistor is not connected to a voltage source but left "open" to allow for external components to pull the output signal to a desired level.
How to use "open collector" in a sentence
Basic
Advanced
open collector
The normal outputs are an open collector type.
All open collector outputs are equipped with protective switches.
The outputs are open collector outputs.
This type of connection is also referred to as open collector.
Example of an open collector output connection.
Digital output transistor open collector.
Second open collector output.
Impulse output inverted open collector.
Relay contacts and open collector signals for other signals.
Output signals are transport status tally signals open collector.
System open collector.
It is very common in integrated circuits for output pins to be open collector.
The KlimaLogg Pro has an open collector hardware output.
This PWM signal must be supplied by the external controller as a lowside driver open collector.
This is used to drive the open collector outputs.
See also
Open collector output, asynchronous pulse.
Digital outputs are open collector.
Open collector with output capacitance 1 nF with external capacitive loads, pay attention to flank gradient.
The ALARM output terminal is an open collector with the following capacity.
Electrically, realization can be by an open-drain or by an open collector output.
The comparator includes an open collector comparator without any feedback loop ;.
The wired AND function below is achieved by using open collector TTL gates.
The voltage comparator U2 has an open collector output which requires an external resistor load.
The remote on / off input can also be connected to an open collector optocoupler.
Open collector NPN transistor, active low.
Counter output NPN open collector.
Or NPN open collector or vane-type sensor with NPN open collector.
The outputs a realized using 8 open collector transistors.
Output 1 Open collector NPN transistor with the emitter connected to ground when activated.
In the particular comparator used, this gives an open collector or floating output.
The 4 Open Collector Outputs can be activated automatically when pre-programmed events take place.
Instead of an emitter follower topology, low-dropout regulators use open collector or open drain topology.
Output, open collector.
The heart of an I2L circuit is the common emitter open collector inverter.
C, Open collector output, active when it is low.
The input / output stage can comprise an open collector or open drain stage with a pull-up resistor.
The injector 26 is capable of being connected with an open collector.
SCSI-1 devices use open collector for electrical signaling.
Transistor output passive, Open Collector.
Contacts consist of open collector circuits capable of switching up to +30 VDC 6 mA resistive load.
Can be used for meters with reed contact, open collector or Namur output.
Open collector output, Sink type.
Inter-lock control output, an NPN-transistor open collector output.
The open collector output has a jack for a 3.5 mm jack plug.
The bus drivers / receivers 45 are preferably of a type having open collector outputs.
Yes, open collector.
Digital adjustable limit switches, 2-wire open collector or type NAMUR.
Pins 1, 2, and 5 are open collector outputs, which must be pulled up to a common referenced supply.
Input specifications are lowactive, non-voltage contact ( ON when active ) or open collector Low when active.
The Open Collector current may not exceed 100 mA.
You'll also be interested in:
Examples of using Collector
Show more
I heard he used to be a collector like us in another town
City collector for waste collecting vessels
Your uncle was quite a collector of many things
Examples of using Open
Show more
Open both hot and cold faucets
We are gonna open our own bowling alley
Open the valves all the way
