Examples of 'open the printer' in a sentence
Meaning of "open the printer"
open the printer - This phrase is a command or instruction to physically open a printer for the purpose of accessing its internal components or paper tray. It is used when someone needs to perform actions like replacing ink cartridges or clearing paper jams
How to use "open the printer" in a sentence
Basic
Advanced
open the printer
Do not open the printer doors or trays yet.
Turn on the printer and open the printer cover.
Open the printer cover and remove paper.
Turn off the printer and open the printer cover.
Open the printer access cover.
Lift the scanner unit and open the printer cover.
Open the printer cover and remove the ribbon.
Pull the lever toward you to open the printer cover.
Open the printer front cover all the way.
Pull this lever in the direction of the arrow to open the printer cover.
Press to open the printer menus.
Press the lever indicated by the arrow in illustration E to open the printer.
Open the printer cover and locate the print head.
Press or to open the Printer menu.
Open the printer cover and remove the jammed paper.
See also
Select the Properties button to open the printer properties dialogue box.
Open the printer cover and remove the paper if exists.
Use the Printer Setup button to open the printer configuration.
Trying to open the printer cover may damage the cutter.
During printing, do not open the printer cover.
Open the printer cover and remove the cause of the cutter lock.
Pull up on handle to open the printer side door Door A.
Then open the printer cover after the paper jam has been removed.
Leave the printer on, open the printer cover.
Open the printer top cover and remove the foam packing material inside.
To change your cartridges, first open the printer lid.
Open the printer left cover and check for toner on the paper ramp.
If the paper end does not come out, open the printer.
Open the printer front cover and check that the toner container is correctly installed.
Once the print carriage has moved forward, open the printer cover.
Open the printer driver Properties and make sure that the port setting is correct.
If paper is caught in the cutter and you can not open the printer cover, open.
Yes Open the printer cover and press the print head bracket until it clicks.
Before following the steps in this procedure, open the printer by pulling the release latches.
Open the printer driver Properties window and then click the Ports tab.
Push the Cover open lever, and open the printer cover.
Be sure not to open the printer cover while the POWER LED is flashing.
Step 1 - Removing the defective print head 1 Open the printer cover.
Open the printer driver Status tab and then click Launch Monitor.
After rebooting the computer, open the printer properties window in the Windows OS . ※ Windows XP.
Open the printer cover by pressing on the opening lever, then pivoting it.
You can also open the printer Toolbox from the HP Solution Center on your computer.
Open the printer left cover 1 and check the transfer roller.
If you open the printer cover accidentally, the ERROR LED blinks.
Open the printer cover by pressing on the opening lever, then tilt the cover up.
Open the printer left cover 1 and clean the separator with a cleaning brush.
Open the printer compartment, and install the batteries at the bottom of the opening.
Open the printer to remove any obstructions to the printhead, and then close the printer.
Yes Open the printer cover and check the film position, replacing it if need be.
Open the printer cover, then turn the power on while holding the FEED button.
You'll also be interested in:
Examples of using Open
Show more
Open both hot and cold faucets
We are gonna open our own bowling alley
Open the valves all the way
Examples of using Printer
Show more
This printer is not guaranteed to work on a network
Start a test print printer is switched off
The printer reboots automatically after selecting an
