Examples of 'operating speeds' in a sentence
Meaning of "operating speeds"
operating speeds - This phrase refers to the speeds at which a system, device, or machine is designed or capable of functioning. It is commonly used in the context of technology, transportation, or manufacturing to describe the speed at which operations or processes are performed
How to use "operating speeds" in a sentence
Basic
Advanced
operating speeds
Excessively low operating speeds impose a heavy load.
Current moulds can provide high operating speeds.
Slow operating speeds limit the production of dust.
Parasitic capacitances are smaller so that higher operating speeds are possible.
Increasing operating speeds is always desirable.
The problems of control increase with higher operating speeds.
Excessively high operating speeds could result in minor injury.
This aspect too is advantageous for achieving greater operating speeds.
High operating speeds favor rapid opening and closing.
The operating environment and the operating speeds are closely related.
Normal operating speeds for powered toothbrushes can vary.
Only lower temperatures or slower operating speeds permit safe operations.
The operating speeds are completely independent of the speed of the chair.
Always check depth settings at intended operating speeds and hydraulic pressures.
Current operating speeds are limited due to the sharp curves on the line.
See also
A railroad route would allow longer vehicles and higher operating speeds.
Typical operating speeds.
Improved heat dissipation via the housing is required at very high operating speeds.
Excessively high operating speeds increase risk of injury and damage to generator.
Some of those most frequently cited are increased operating speeds and increased train density.
Excessively high operating speeds increase risk of injury and damage to water pump.
These gears provide synchronised power transmission and various operating speeds to each shaft.
Vehicular operating speeds on each type of street will be passively controlled through appropriate design.
The following are the lists of world record average operating speeds between two stations.
Excessively high or low operating speeds increase risk of injury and damage to pressure washer.
Low friction is defined as material which develops hydrodynamic lubrication at normal shaft operating speeds.
Safe operating speeds that suit the function and level of safety of the road.
The large electric motor spins up the engine to operating speeds before injecting fuel.
Excessively high operating speeds increase the risk of injury and damage to the water pump.
Oil will form a wedge that will not break down under normal operating speeds.
Higher operating speeds can be achieved through reduced axle loads and increased density of sleepers.
This has the advantage of permitting high operating speeds and leading to reduced overall dimensions.
Some bi and tri cable elevated ropeways and reversible tramways achieve much greater operating speeds.
Extremely high operating speeds cause a high number of load cycles and create severe operating conditions.
The more severe working conditions include higher operating speeds and higher nip pressures.
Increased operating speeds with the SRB ULTAGE range.
The primary and secondary CPU capabilities are different operating speeds.
Terminals can have different operating speeds and some can operate significantly faster than others.
The two turnouts are still among the fastest in terms of operating speeds in Germany.
Engine Operating Speeds Operate the unit at full throttle while cutting grass.
Polish authorities maintain a program of improving operating speeds across the entire Polish rail network.
Choice of operating speeds to increase fines production, when required.
Confirm RIC designation selection against operating speeds.
Due to the operating speeds to which they are subjected, they deteriorate quickly.
Heavy-duty motor maintains operating speeds under load.
Excessively high operating speeds could result in minor injury and / or generator damage.
However, it has not been possible to achieve the desired operating speeds.
The operating speeds of the routers, which are asynchronous, can thus vary geographically.
By adjusting speed button, you can select up to three different operating speeds.
By widening the scrolls, higher operating speeds may be achieved without danger of overheating.
You'll also be interested in:
Examples of using Operating
Show more
The operating instructions are part of this product
Common sense when operating a power tool
The operating instructions are a component part of the
Examples of using Speeds
Show more
Recommended speeds for maximum drilling performance
Press to toggle between two fan speeds
Use low speeds for sawing metal
