Examples of 'optical paths' in a sentence
Meaning of "optical paths"
optical paths: Optical paths refer to the route or pathway that light travels through in a system or device that utilizes optics. This phrase is commonly used in the context of optical instruments, such as cameras, telescopes, or fiber optic communication systems
How to use "optical paths" in a sentence
Basic
Advanced
optical paths
Several types of optical paths are distinguished in the endoscope.
Color of cells to differentiate optical paths.
Switchable secondary optical paths having different lengths.
Optical paths enter the windhield at different directions u.
The modulators define optical paths having different wavelengths.
The mirror materializes the intersection of the two optical paths.
Each of the optical paths includes one of the filters.
The reference arm must make it possible to equalize the optical paths.
The optical paths are indicated by dashed lines on the figures.
Various examples of shared components and optical paths are set out below.
All optical paths significant for the measurements are then coplanar.
Interference takes place when these two waves travel identical optical paths.
The second optical paths each consist of three horizontal sections.
The array of optical elements is located where the optical paths cross each other.
The optical paths corresponding to these M microguides are different from each other.
See also
Therefore this optical module does not have any optical paths for an excitation beam.
The described use of at least one dichroic mirror therefore provides substantially collinear optical paths.
In this way the equality of optical paths is enforced by making the paths identical.
O Micromechanical components for routing optical paths.
The solid lines correspond to optical paths and the dashed lines to electrical connections.
In this case, the program determines the optical paths.
The two optical paths are thus the following,.
The beam splitter sends the split light on different optical paths towards the mirrors.
Thus, the optical paths will not be modified in transmission.
In a biaxial system, the transmitter and receiver optical paths are physically separated.
Moreover, the optical paths of the light rays are quite short.
Transfer the contents of the flasks into spectrophotometer cells with optical paths of 1 cm.
If new optical paths are created, the newly created optical paths should be minimized.
Moreover, the aperture angle of the camera can cause these optical paths to vary slightly.
Since optical paths are reversible, any optical path can be traced in the reverse direction.
After a chosen length l, the waves in the two guide-branches have followed different optical paths.
This results in well-controllable optical paths with consistently defined angles of reflection.
FIG . 7 is a schematic view of an OCT device for contactless measurement of optical paths.
More precisely, the optical system includes various optical paths respectively associated with various vision distances.
A first stage includes a switch C1 constituting the first switch of all of the optical paths.
Figure 4 presents optical paths in the eye in an embodiment according to the Gullstrand 's principle.
The secondary beams H 1 and H 2 thus follow two perfectly reciprocal optical paths in the interferometer.
FIG . 5 schematically shows the various optical paths according to one variant of a visual screening apparatus.
The prism surface 124 has a common plane for two emitter optical paths.
Glass cells with optical paths of 1 cm.
Optical paths 46 and 52 can comprise for example optical fibers or free space optics paths.
Embedded in the wafer are optical paths 6, which, in general, traverse a wafer dimension.
A beam combiner 48, for example a polarizer, is used to recombine the first and second optical paths.
Co-centric optical paths are essentially co-centric.
However, the MinTH prefers single-hop optical paths as far as possible.
Thus, the optical paths of the two half-cells are then equal.
Total variability of embedded depth of the optical paths in the wafer can be + / - 3 microns.
The optical head 100 comprises a number of optical elements which are common for both optical paths.
The scanning unit comprises a plurality of optical paths 33 generated by a related light source 3.
The lenses 41, 42 used are preferably distinct optical components on the right and left optical paths.
You'll also be interested in:
Examples of using Optical
Show more
We had an optical failure in a fifteen circuit and i
Inset shows a dissolved oxygen optical logger
Access to the optical disk system by developing
Examples of using Paths
Show more
It seems our paths are drawn to be crossed here
Except we will not be crossing paths much
One day our paths may cross
