Examples of 'output of amplifier' in a sentence
Meaning of "output of amplifier"
Output of amplifier: It refers to the signal or sound produced by an amplifier device, which increases the amplitude or power of an input signal
How to use "output of amplifier" in a sentence
Basic
Advanced
output of amplifier
The bit line load change tends to zero the output of amplifier ADj.
The output of amplifier 33 is connected to the second terminal or output terminal of resistor R.
An nMOS transistor 7 is connected between the first input and the output of amplifier 4.
The output of amplifier A1 is then negatively biased and thyristor SCR1 remains nonconductive.
A negative feedback resistance Rc connects the negative input to the output of amplifier 4.
The output of amplifier A2 is connected to the second input of differential amplifier A3.
The output S of the filtering element is the output of amplifier A1.
The output of amplifier 4 is applied to an input of an adder 5.
It is assumed that the output of amplifier 84 is zero.
The output of amplifier 26 is the output of test signal generator 2.
Terminal 5 represents the output of amplifier 1.
The output of amplifier 71 is connected to ground by means of an adjustable resistance 76.
It is desired to maintain the output of amplifier 330 at a constant current.
The validation input of counter 11 is connected to the output of amplifier 2.
The output of amplifier 19 is coupled to the control input of variable attenuator 7.
See also
The latter is controlled by the signal supplied to the output of amplifier 40.
The output of amplifier 31 provides the generated sine wave signal.
The circuit is completed by a buffer amplifier 36 connected to the output of amplifier 30.
The output of amplifier 7 can be fed to track and hold circuit 8.
A feedback loop connects the output of amplifier 501 to the inverting input.
Resistor 6 is connected between the first input and the output of amplifier 3.
The amplified measurements value at the output of amplifier 506 fall in a different dynamic range.
The output of amplifier 62 is connected to one wire of line BUSD.
A third voltage level S-F can be provided at the output of amplifier 22.
The output of amplifier circuit 130 is used to control an accommodative IOL.
A high logic level then appears on signal SC at the output of amplifier 127.
The output of amplifier 6 is connected to line L1, also composed of a stranded wire pair.
Figure 3B illustrates the resulting voltage vs. time waveform at the output of amplifier 30.
Capacitor C 4 is connected between the output of amplifier 10 and the input of integrator unit 5.
The output of amplifier A4 is connected to its negative input through a negative feedback resistance 17.
A fourth voltage level S can be provided at the output of amplifier 21.
The output of amplifier 31 is connected to an output S of the circulator.
First voltage level F can be provided at the output of amplifier 24.
The output of amplifier U4D is input to logic gate U8.
Capacitor 60 that has one of its terminals connected to the output of amplifier 58 ;.
The output of amplifier 46 is connected to the input of a multiplier 47.
The amplified analog signal output of amplifier 18 is applied to a sensor 20.
The output of amplifier 64 is connected to the base of transistor 62.
If the reverse inhibit voltage 52 is activated, the output of amplifier 76 is clamped at ground.
The output of amplifier 20 is also connected to another display unit 32.
Current flows through resistor 92 to the inverting input and output of amplifier 86 when transistor 90 conducts.
The output of amplifier 5 thus goes low, and that of inverter 33 goes high.
A resistor 182 provides a negative feedback path between the output of amplifier 180 and its inverting input.
This causes the output of amplifier 42 to saturate at 0 volts.
Thus, a potential equal to V ₃ may be found at the output of amplifier 17.
The output of amplifier 18 is coupled to an identical envelope detector / amplifier 20b.
The nominal signal level at the output of amplifier 140 is approximately 50 mv peak to peak.
The output of amplifier 58 supplies a preamplified signal carried by connection 24 to detection module 30.
DC excitation across the biosensor 31 is established by the output of amplifier 38.
An adder 20 receives the output of amplifier 18 and the integral of the output of amplifier 19.
You'll also be interested in:
Examples of using Amplifier
Show more
Make sure that the amplifier is switched on
Amplifier is picking up alternator noise or radiated noise
Never operate the amplifier without cover
Examples of using Output
Show more
One output will contribute to this outcome
Illuminates when output is sent to the tray
Output signals common to measuring technology are available
