Examples of 'over tighten' in a sentence
Meaning of "over tighten"
over tighten: This phrase refers to the act of tightening something too much or beyond the necessary or recommended level. It is often used in discussions about mechanical operations, construction, or repairs to caution against excessive tightening that may cause damage
How to use "over tighten" in a sentence
Basic
Advanced
over tighten
Do not over tighten or removal will be difficult.
Apply firm pressure but do not over tighten.
Do not over tighten the top screw.
Check and tighten all bolts do not over tighten.
Do not over tighten the compression nut.
Turn clockwise to lock in plate and do not over tighten or force it.
Do not over tighten to prevent stripping of threads.
Warning do not over tighten screws.
Do not over tighten the spark plug when installing.
Tighten the two mounting screws be careful not to over tighten.
Do not over tighten the retaining knobs.
The valve stem should still move freely do not over tighten.
Do not over tighten the tine bolt.
Tighten the mounting screws until they are equally compressed do not over tighten.
Do not over tighten the strap lock.
See also
Install the propeller and tighen the nut with care not to over tighten.
Do not over tighten the locking knob.
Replace the Cap on the Tank FIRMLY but do not over tighten.
Do not over tighten pipe connection to regulator.
Be careful to tighten, but do not over tighten.
Do not over tighten the fluid tip.
Cap to be hand tight, do not over tighten.
Be careful not to over tighten the battery cap.
Do not over tighten the retaining nut as over tightening can crack the grinding wheel.
Be careful not to over tighten the locking nuts.
Be sure the bolts are tight, but do not over tighten.
Do not over tighten spindle nut.
Make sure the installation is fi rm, but do not over tighten the nuts.
Do not over tighten metal screws in plastic parts.
Properly tighten the hose to the inlet fitting, but do not over tighten.
Do not over tighten the screws.
Gently re-tighten fittings if leaks are apparent, Be careful not to over tighten.
Do not over tighten orifice hoods.
Tighten the bolt until snug, but do not over tighten to the point of binding.
Do not over tighten the connections.
Straps need further adjustment after ambulation . Do not over tighten.
Do not over tighten wheel nut.
Tighten the jam nut snugly by hand . Do not over tighten the nut.
Do not over tighten the hex head screw.
Slide kick plate back into position and tighten recessed screws . Careful not to over tighten.
Never over tighten bolts or screws.
CAUTION, Take care not to over tighten screws.
Do not over tighten the clamp.
For a plastic fi tting, hand-tighten the nut and do not over tighten.
Do not over tighten the ties.
Re-install the light support panel . Do not over tighten screws.
Do not over tighten threaded parts.
Remember, it 's a traumatic technique, so do not over tighten.
Do not over tighten the connector.
If needed, use a wrench ( spanner ) or pliers, but be careful not to over tighten.
You'll also be interested in:
Examples of using Tighten
Show more
Tighten the screw through the clips
I will just tighten these up for you
Tighten properly the connection block screws
