Examples of 'over-current' in a sentence
Meaning of "over-current"
Over-current (noun): An excessive electric current flowing through a circuit, which can lead to overheating or damage
How to use "over-current" in a sentence
Basic
Advanced
over-current
Receptacle with correct over-current protection is.
Adjust an over-current that makes it possible to maximize.
An example of this would be an over-current fault.
Connection and over-current protection of SPDs.
Over-current triggering of the oscillatory mode is now discussed in more detail.
Any electrical disconnect or over-current protection devices.
The over-current threshold for each is different.
This is also the case when the over-current protection is activated.
Adjusts an over-current that may be inserted to aid in striking the arc.
The main circuit should be protected by short circuit or over-current protection.
Overcharge will cause over-current or damage to the compressor.
Over-current protection method for lithium battery and device thereof.
This measure has the advantage that an over-current guard is provided.
It provides over-current protection through the use of fuses.
A circuit breaker may be used as both a switch and over-current protection device.
See also
Check the over-current relay on the fan motor to determine whether it has.
This may prevent an amplifi er from shutting down due to over-current protection circuitry.
Receptacle with correct over-current protection is provided for service cord connection.
For example, a fuse or circuit breaker will disconnect electricity in case of an over-current condition.
However, there always exists an over-current level liable to destroy the component.
The current control ring will start working again in the event of over-current.
Once an over-current is applied to the circuit breaker, heat is generated from a heater.
Current control is used because of direct current regulation and easy over-current protection.
Once the over-current condition is eliminated, the driver circuit returns to normal operation.
Either embodiment of the devices may contain overvoltage and / or over-current protection circuitry.
With over-current this would be augmented by a first voltage for a minimum first amount of time.
This cycle is repeated at the delay interval until the over-current condition has subsided.
Provides over-current and over-voltage protection for safety of the chip and programmer hardware.
A determination module for determining if the charging current is over-current according to the charging voltage ;.
Over-current has the effect of compressing the prices and the margins of the industrial groups.
Users select the policy how the system responds to over-temperature and over-current events.
The over-current protection means are provided for the said PWM bridge inverter.
This trip device includes a bimetal, which heats and bends in response to a persistent over-current condition.
Over-current protection and over-temperature protection are built in to protect the Battery and the motor.
A circuit breaker provides automatic current interruption to a monitored circuit when undesired over-current conditions occur.
An over-current from the USB port was detected.
Configuring the bidirectional current-regulating circuit to remove an over-current condition in the electrical power grid.
The over-current in transistor T is more difficult to assess.
Switches Single small push-button switch activates over-current detection circuit.
Press the button of the over-current protector on the side of Main Power Box.
Abstract, One way to protect electrical installation from over-current is the use of fuse.
Automatic over-current protection - no fuses required.
Each USB port is equipped with over-current protection.
Over-current detection and protection.
Sets the current limit for CPU Core over-current protection.
Over-current and overvoltage multi-circuit protection.
Protection Functions, Short circuit protection over temperature protection over-current protection.
All lines have over-current protection.
Protection against over-voltage and over-current.
Thus the risk of over-current at start-up is reduced.
