Examples of 'overall thickness' in a sentence
Meaning of "overall thickness"
Overall thickness: This term refers to the total measurement of thickness or width across the entire surface or structure. It provides a comprehensive view of the thickness in its entirety.
How to use "overall thickness" in a sentence
Basic
Advanced
overall thickness
Dimensions the overall thickness of the wall.
Overall thickness of the post is measured at the body.
Specifies the overall thickness of the rule.
Subsequent treatment of the material may reduce the overall thickness somewhat.
The overall thickness of your beard.
The retainer portion increases the overall thickness of an ornament.
The overall thickness of the wall of carotid artery are doubled.
This variant is advantageous in terms of the overall thickness of the movement.
This enables the overall thickness of the display system to be reduced.
These rolls polish and cool the sheet to the desired overall thickness.
Minimum overall thickness.
This particular structure for an electronic module has the advantage of reduced overall thickness.
The larger undulating waveform has an overall thickness that is increased.
The overall thickness of the device was varied by using varying numbers of layers.
The male mold also controls the overall thickness of the finished lens.
See also
The overall thickness of the substrate can be varied depending on the final use.
It depends on how the toy is designed and the overall thickness of the silicone.
The overall thickness of the packaging does not play a determining role in the present invention.
This increased área foot print helps reduce the overall thickness of the pad.
The overall thickness of the coating can vary depending on the end use application.
These two constructions suffer from relative disadvantage of increasing the overall thickness of the arrangement.
The overall thickness of the active thermal protective composition was eighteen millimeters in each case.
The ports in the gaskets nominally have the same overall thickness as the gasket itself.
Preferably the overall thickness is not more than four times the gauge of the material.
The strips at the same level preferably abut rather than overlap to reduce overall thickness.
The individual layer thickness and overall thickness of the multilayer coating depends on specific applications.
Samples were evaluated for volume porosity, and overall thickness.
The overall thickness of the sandwich was about 1 mm.
The liners each have an overall thickness of 2 mm.
Thus the overall thickness of the material is approximately 1 mm.
Nevertheless, this embodiment leads to the overall thickness of the apparatus being increased.
The overall thickness of the said structures preferably does not exceed 2 mm.
However, this value also depends on the overall thickness of the substrate.
Thus, the overall thickness of the multilayer structure may be controlled.
The thickness of the strips is substantially equal to the overall thickness of the platforms 32.
In addition, the overall thickness of the marker housing is reduced.
However, the increased coating thickness results in increased overall thickness of the stent wall.
Hence, a reduction in the overall thickness of the implant is a critical advantage.
Wafer check valves are typically narrow profile ( short length ) valves with minimal overall thickness.
This means that the overall thickness must be at least about 7 mm.
All glazing or panel fillings up to 48 mm overall thickness.
In each section, the overall thickness is decreased compared to an equivalent simple lens.
This results in their elimination, which reduces the overall thickness of the layer of fat.
Reduction of the overall thickness of the component with improved flexibility and integration ;.
After deposition, the piece was calendared on a roller press to an overall thickness of 55 µm.
The result is that the overall thickness of the joint - as installed - can be decreased.
As a result, the core layer represented 96 percent of the overall thickness.
The resulting overall thickness of the dry cathode active layer after pressing was 17 micrometres.
Therefore, said height is not less than the overall thickness of said corrugated metal sheet.
Thus, the overall thickness of a mobile terminal having such a conventional display unit is increased.
You'll also be interested in:
Examples of using Thickness
Show more
Minimum recommended thickness of zinc vs thickness of steel
Thickness of tanks made with double walls
Reduction of wall thickness and additional protection
Examples of using Overall
Show more
To increase the overall performance of the sector
Overall review and appraisal of the implementation
Organs dealing with overall development issues
