Examples of 'overhead stirrer' in a sentence
Meaning of "overhead stirrer"
An overhead stirrer is a laboratory device used for stirring, mixing, or agitating substances in a scientific or industrial setting. It consists of a motor-driven shaft with a paddle or impeller that is suspended from above, allowing it to be placed directly in the mixture. Overhead stirrers are commonly used in chemistry, biology, and pharmaceutical laboratories
How to use "overhead stirrer" in a sentence
Basic
Advanced
overhead stirrer
An electric overhead stirrer was in the sample funnel.
To this flask was added an overhead stirrer.
An overhead stirrer is used to conduct this step.
The contents of the beaker were mixed using an overhead stirrer.
An overhead stirrer was placed into the jar and stirring was commenced.
The polymer was dosed as received with mixing using an overhead stirrer.
The overhead stirrer and the feeding lines were then connected.
The reaction flask was fitted with an overhead stirrer and a thermometer.
Typically, an overhead stirrer made of a corrosion resistant shaft and blade is used.
The mixture was emulsified with an overhead stirrer and high sheer paddle.
The slurry is stirred throughout using a propeller blade attached to an overhead stirrer.
The two streams were mixed using an overhead stirrer fitted with an impellor.
The mixing was carried out in small aluminum buckets with an overhead stirrer.
A reactor equipped with an overhead stirrer was charged with aqueous stock solution and organic solvent.
The mixture can become very thick and an overhead stirrer is recommended.
See also
The overhead stirrer and the feeding lines were connected and stirring speed set to 450 rpm.
A multineck round bottom flask was fitted with a nitrogen sparge and overhead stirrer.
L container was equipped with an overhead stirrer set off-center and filled with 4 L of water.
The RBF was fitted with a reflux condenser and an overhead stirrer.
The reaction was stirred with an overhead stirrer for 18h at room temperature.
The solution was transferred to an 81 jacketed vessel equipped with an overhead stirrer.
The solution was stirred by overhead stirrer and cooled to an internal temperature of ∼ 2 °C.
Once filled, the basket was connected to the overhead stirrer motor.
General Information MM-1000 Overhead stirrer Multi Mixer is designed for mixing solutions of different viscosity.
Mixing may be provided by a mechanical device, such as a magnetic or overhead stirrer.
The water was stirred with an overhead stirrer while warming to 70°C.
The reaction was carried out in a three-necked flask fitted with an overhead stirrer.
The mixture was vigorously stirred with an overhead stirrer and placed in a preheated 100°C oil bath.
During this time the melt was actively stirred at about 80 rpm using an overhead stirrer.
The mixture was stirred by a overhead stirrer with a propeller at 1300 rpm.
The complete formulation was mixed well for 5 sec using the same overhead stirrer.
The mixture was stirred with an overhead stirrer for 20 minutes to form an enzyme-in-oil-in-water emulsion.
Always use the largest magnetic follower possible and, if necessary, use a mechanical overhead stirrer.
The reaction mixture was stirred at 680 rpm using an overhead stirrer with a propeller stirring blade.
This liner was then placed and sealed inside a 300 cc autoclave equipped with an overhead stirrer.
To an inert, glass-lined reactor equipped with an overhead stirrer was charged acetonitrile ( 8 I ).
The allyloxy dextran was subjected to ozonolysis in a 4.0 L beaker equipped with an overhead stirrer.
Mixing was accomplished with an overhead stirrer ( Model RW20DZM ex Tekmar ).
This is stirred at room temperature by a Wheaton ™ overhead stirrer.
The lipids are solubilized 120 using for example, an overhead stirrer at a suitable temperature.
The organic phases were combined and transferred to a 12 L three-necked flask equipped with an overhead stirrer.
The resulting mixture was refluxed for 12 hours in an overhead stirrer under argon atmosphere.
Mls of 10 % brine was added, and stirred as rapidly as possible using an overhead stirrer.
The reaction mixture was stirred with an overhead stirrer at 400 rpm.
Example 9 A 500 mL roundbottom flask was used with an electronic heating mantle and overhead stirrer.
The reactor was equipped with an air-driven, overhead stirrer and thermowell.
The mixture was stirred for 30 minutes using an overhead stirrer.
The Extraction Solution was continuously mixed with an overhead stirrer set at 500 RPM.
The final mixture was stirred at 150 rpm with an overhead stirrer.
You'll also be interested in:
Examples of using Overhead
Show more
You have got an overhead light here
Overhead painting plant for large parts
Maintenance of overhead costs for projects managed
Examples of using Stirrer
Show more
Attach the stirrer to the drive axle
Stirrer for even results without burn
Water and a magnetic stirrer are added therein
