Examples of 'overtighten' in a sentence
Meaning of "overtighten"
overtighten (verb): To tighten something too much or more than necessary, often leading to damage or dysfunction. This term is commonly used in the context of mechanical or technical work, such as fastening bolts or screws
Show more definitions
- To tighten too much.
How to use "overtighten" in a sentence
Basic
Advanced
overtighten
Do not overtighten the adapter on the pole.
Do not use tools or overtighten the nut.
Do not overtighten gas fitting when attaching to.
Take care not to overtighten the lamp.
Do not overtighten the appliance as it could be damaged.
Make a tight connection but do not overtighten.
Do not overtighten the door adjustment screw.
Replace the brush cap do not overtighten.
Do not overtighten the screws and bolts.
Do not use tools and do not overtighten.
Do not overtighten regulator when attaching to gas.
Be careful not to overtighten the screws.
Do not overtighten screw or mechanism will bind.
Be careful not to overtighten the nuts.
Do not overtighten the battery holddown nuts.
See also
Be careful not to overtighten the screw.
Do not overtighten as this may cause discomfort.
Be careful to not overtighten the hose.
Do not overtighten screw as threads can strip out.
Tighten the knob do not overtighten.
But do not overtighten against inner nut.
Tighten the cap snugly but do not overtighten.
Do not overtighten the spray tip.
Do not cross thread or overtighten couplings.
Do not overtighten or you may crush the tubing.
This bolt is very difficult to overtighten.
Take care not to overtighten small brass screws.
Tighten the brush cap but do not overtighten.
Do not overtighten the hex nut.
Tighten heat shield snugly but do not overtighten.
Do not overtighten the wheel nut.
Tighten down throttle bracket making sure not to overtighten.
Do not overtighten screws to avoid damages to the valves.
Make sure that you never overtighten the fine adjustment.
Do not overtighten connection fitting into ball valve.
Hold as before and tighten the nut firmly but do not overtighten.
Do not overtighten the locking screws.
Tighten the grub screw carefully making sure you do not overtighten it.
Do not overtighten because the coupling may be damaged.
Vitreous china can break and chip if you overtighten bolts and nuts.
Do not overtighten the cable connections.
Replace glass retainers with screws making sure not to cross thread or overtighten.
Do not overtighten the mounting screw.
Opt for automatic pedals releasing rotations and do not overtighten resistance heaving.
Do not overtighten or use tape or sealants on the valve.
Assemble fan on motor shaft and tighten hex nuts firmly be careful not to overtighten.
Do not overtighten bulb or it may be difficult to.
Do not use liquid sealers on the vertical valve and do not overtighten either valve.
Do not overtighten or allow pipes to turn when tightening.
Assembly procedures Do not overtighten the screws.
