Examples of 'paper feed' in a sentence
Meaning of "paper feed"
paper feed: This phrase refers to the process of inserting sheets of paper into a machine or device for printing, scanning, or copying. It suggests the mechanism responsible for guiding and moving the paper through the equipment
How to use "paper feed" in a sentence
Basic
Advanced
paper feed
Paper feed table is in the lowest position.
Replace the paper feed clutch.
Paper feed control system for printers.
Do not reach into the paper feed slot.
Paper feed with fanfold labels.
Check that no paper is in the paper feed slit.
Paper feed and paper catalog.
Receipt and journal independent paper feed function.
Paper feed system for a typewriter or the like.
Gently open the paper feed tray towards you.
Never reach into the slot of the paper feed.
Inkjet paper feed problem.
Do not touch the thermal head or paper feed motor.
The paper feed mechanism.
Be careful not to put your fingers in the paper feed.
See also
Use this paper feed and output method when.
Pressing this button once causes a paper feed of one line.
Attach the paper feed tray to the automatic document feeder.
Remove the jammed paper by pulling it in the paper feed direction.
The paper feed roller will rotate as it is cleaned without paper.
Grasp the edge of the paper feed tray and lift it up.
Paper feed is not.
Toner may have spilled onto the paper feed path.
Exactly adjust the paper feed mode continuous or rather single sheet.
This means do not shred CDs in main paper feed slot.
The paper feed table must be in the top position when folding.
Pull out the paper from the paper feed opening.
Sensors in the paper feed area measure the thickness of paper about to be shredded.
Displays the remaining life of the paper feed roller unit.
The paper feed path denotes a paper moving path in the course of printing.
Automatic paper feed.
Paper contact spring not pressed not enough paper in paper feed.
Clean the light barrier in the paper feed using a dry brush or cloth.
Print creative projects on card stock using the rear paper feed slot.
Place the document on the paper feed tray so that the document is face up.
An idler roller may be soft foam rollers or paper feed rollers.
The thermal head and paper feed motor for the thermal section are hot.
The raster skip command is a recording paper feed start command.
Through the paper feed opening along the entire width on to the cutting rollers.
The paper in the cassette is being moved to a position where paper feed is possible.
Press the paper feed button on front of the printer and additionally the start button.
Again with the green arrow button or by the light barrier paper feed.
A filter paper feed mechanism is provided for one of the brewers used primarily for coffee.
They are near the center of the product behind the paper feed rollers.
Open the paper feed tray and remove the protective tape that is inside the unit.
A reproduction apparatus of this type may also contain a copy paper feed module.
The recording paper feed process before the character code print operation will be described below.
The thermal paper is held against the print head by a paper feed roller.
Paper feed key Advance the paper roll.
Splinter protection is only guaranteed if the safety element is covering the paper feed opening.
