Examples of 'parallel fence' in a sentence
Meaning of "parallel fence"
parallel fence ~ A parallel fence refers to a secondary barrier or boundary that runs parallel to an existing fence. It is often used to enhance security, privacy, or containment by creating an additional layer of protection or separation
How to use "parallel fence" in a sentence
Basic
Advanced
parallel fence
Tighten the parallel fence adjustment knob y.
Your circular saw includes a parallel fence.
To remove the parallel fence proceed in reverse.
The adjustment can be read on the parallel fence scale.
The parallel fence is used to saw in a straight.
Fit and adjust the parallel fence.
Tighten the parallel fence adjustment knob x.
Fold the handle down and lock the parallel fence into place.
The parallel fence enables you to make repeated.
Securely tighten the parallel fence adjustment knob.
The parallel fence is used to make cuts parallel to an edge.
Guide rods for parallel fence.
Set the parallel fence to the required distance.
Wing bolt for parallel fence.
Slide the parallel fence into the desired position.
See also
Press the material firmly against the parallel fence and on the planer.
Set the parallel fence to a known angle and lock.
Check that the saw is unplugged from the power supply before fitting the parallel fence.
The parallel fence is used to for optimum control on narrow workpieces.
Replace the guide rods of the parallel fence of your router by the.
The parallel fence can be mounted on either side of the blade.
If necessary, fit and adjust the parallel fence.
Set the parallel fence to the cut width of the workpiece.
U Loosen the locking knob . u Pull the parallel fence off the tool.
The parallel fence should be below the planer when installed correctly.
Mounting and adjusting the parallel fence fi g. O.
The parallel fence can be used either on the machine table or on the.
Fitting and removing the parallel fence fig . C.
The parallel fence is used for cutting parallel to the edge of the workpiece.
Mounting and adjusting the parallel fence fig . B.
Parallel fence and position the fence opposite the front edge of the.
ALWAYS use the parallel fence when making rip cuts.
Parallel fence and position the fence opposite the front edge of the riving knife.
Mounting and adjusting the parallel fence fig . G.
Adjust the parallel fence with the low profile facing the blade and.
Mounting and adjusting the parallel fence fig . Q.
Slacken the parallel fence adjustment knob ( y ) to allow the parallel fence to pass.
Fitting and removing the parallel fence fig. B.
The parallel fence ( x ) is used for cutting parallel to the edge of the workpiece.
Slacken the locking screw ( v ) as to allow the parallel fence to pass.
The parallel fence ( o ) is used for cutting parallel to the edge of the workpiece.
Slacken the fence adjustment knob ( i ) to allow the parallel fence to pass.
The parallel fence ( w ) is used for cutting parallel to the edge of the workpiece.
Slacken the fence adjustment knob ( y ) and set the parallel fence ( x ) to the desired width.
The parallel fence ( r ) is used for cutting parallel to the edge of the workpiece.
Slacken the fence adjustment knob ( x ) and set the parallel fence ( w ) to the desired width.
Remove the parallel fence and insert the T-bevel in the guideway of the bench plate.
Slacken the fence adjustment knob ( l ) and set the parallel fence ( r ) to the desired width.
Adjust the parallel fence using the fine adjuster 18.
Mounting the reversible parallel fence fig . A2.
You'll also be interested in:
Examples of using Parallel
Show more
Special parallel relationships and succession issues
Your chin should be parallel to the floor
In parallel the existing investment plans are being reconsidered
Examples of using Fence
Show more
I want the fence and the baby
Fence the waste brine conditioning ponds
Be sure to use the fence for protection
