Examples of 'parallel stop' in a sentence
Meaning of "parallel stop"
parallel stop: a situation where two or more stops or stations for public transportation are located next to each other, allowing passengers to easily transfer between different lines or modes of transport
How to use "parallel stop" in a sentence
Basic
Advanced
parallel stop
Parallel stop as stop for cross cuts.
The longitudinal or parallel stop is not.
The parallel stop is used as a guide in slitting.
The portable circular saw is equipped with a parallel stop.
Mount the parallel stop and adjust as required.
Place the angle stop on top of the parallel stop.
The parallel stop enables precise cuts to be made.
Loosen the locking screw for the parallel stop.
Adjust the parallel stop to the desired measurement.
You must always ensure that the parallel stop.
Remove the parallel stop following the inst.
Only one animal appeared on both images at a parallel stop.
The parallel stop can be adjusted in arrow direction.
The low guide face of the parallel stop is best used in this case.
The parallel stop can also be used as a table widener.
See also
Fix the distance required between the parallel stop and the edge of the workpiece.
The parallel stop can be attached to any side of the saw blade.
Bevel cuts must always be used using the parallel stop 7.
Adjust the parallel stop to the width of workpiece you.
If the process requires a milling cutter at an equal distance, then a parallel stop is used.
Now slide the parallel stop into the guides on.
If possible, when cutting, use the parallel stop.
The size of the parallel stop does not matter much.
You can set the width of the step with the parallel stop 13.
Blade and the parallel stop in addition to the scale indicator.
Locking screw for parallel stop 9.
Clamp the parallel stop in the desired position by pressing the clamping lever 27.
The workpiece jams while sawing? - Readjust riving knife! - The parallel stop tilts or moves.
Working instructions The parallel stop can be adjusted in arrow direction.
A parallel stop can be used for section widths up to 180 mm.
Sawing very narrow sections, Insert the parallel stop ( 4 ) from the right into its holder.
The parallel stop ( 7 ) can be set to the required.
Locking screws for parallel stop 14.
Adjust the parallel stop ( 7 ) to the width of workpiece you require.
For cutting wooden parts lengthwise the parallel stop ( 12 ) must be used.
The parallel stop ( 7 ) supplied with the bench.
Workpiece and push the workpiece along the parallel stop ( 7 ) and into the blade 5.
Always use the parallel stop ( 24 ) on all cuts for which they are intended.
Fitting and setting parallel stop Fig . 4.
Slide the parallel stop ( 7 ) to the right or left side of the saw table 1.
You can fit the parallel stop ( 11 ) on either the left or right of the equipment.
You'll also be interested in:
Examples of using Parallel
Show more
Special parallel relationships and succession issues
Your chin should be parallel to the floor
In parallel the existing investment plans are being reconsidered
Examples of using Stop
Show more
They would not stop killing sharks
Next stop menswear and sporting goods
That is not gonna stop me from trying
