Examples of 'part load' in a sentence
Meaning of "part load"
Part load: Referring to a shipment or delivery that does not utilize the full capacity of a vehicle, container, or storage space. Part load typically involves transporting goods or items that occupy a portion of the available volume, as opposed to a full load
How to use "part load" in a sentence
Basic
Advanced
part load
Excellent part load performance has been reported.
Contact us for booking your part load.
Part load less than truck load.
Temperature mixing losses develop at part load.
Part load ratio of high temperature process chillers.
Means here part load elongation.
Freight forwarding by land part load.
Cc is a part load compensation factor as follows.
Such an ejector may be inefficient at part load operation.
Cc is the part load compensation factor.
The result is optimal operation at both full load and part load.
No throttling is required at part load so avoiding pumping losses.
Part load for heating.
Gas turbine with improved part load emissions behavior.
Improved part load performance of variable speed screw compressor.
See also
It also focuses on the development of technologies or systems improving part load efficiency.
Our full and part load services are suited to you.
Methods of operation of a gas turbine with improved part load emissions behavior.
Part load ratio.
Build greater efficiency into your part load and groupage shipments.
Part load efficiency.
Transportation with covered vehicles for part load and full load shipping.
At part load.
The limited range at full load also results in limited range under part load conditions.
Only refuelling at part load or when shut down is now undertaken at AGRs.
Sea Container full load or part load.
Lean burning at part load is possible which also improves thermal efficiency.
Thus the objective function OBJ is a function of the part load ratios PLRi.
Part load efficiencies are very different for the two compressor types.
Declared cooling capacity for part load at given outdoor temperatures Tj.
Normal SIGE engines operate at much reduced thermal efficiency at part load MEP.
Full load and part load national and European distribution.
The designation Q indicates an example state of outside air under part load conditions.
Part load conditions for air conditioners, comfort chillers and heat pumps.
Cos phi nearly 1 on the net in case of full and part load.
A part load region where the wind speed is below a rated wind speed ; and.
Patented vibration protection system, preventing pulsations in part load at high pressure ratios.
For instance, in part load operation a tip speed ratio of the rotor blades is calculated.
To enable response to under - frequency events, plant normally have to operate at part load.
For reducing the CO part load emissions, the fuel temperature at part load is increased.
For ambient temperatures higher than the reference ambient temperature, the part load ratio shall be 1.
Part load conditions for SEPR calculation for air-cooled high temperature process chillers.
Further, the larger vaneless diffuser space reduces the compressor lift capability under part load conditions.
Part load conditions for SEPR calculation for water-cooled high temperature process chillers.
It can be carried out in each CO emissions-critical part load range.
Parameters at part load and ambient temperature 5 °C.
Active free-wheel, allowing unlimited part load operation.
Declared capacity for heating for part load at indoor temperature 20 °C and outdoor temperature Tj.
Besides shut down of CO2 capture system 's components, their part load operation is possible.
The part load elongation ( PIE ) values were also reported in Fig.
