Examples of 'particle size range' in a sentence
Meaning of "particle size range"
particle size range: It indicates the spectrum of sizes within which particles exist. This phrase is commonly used in the fields of science, engineering, and manufacturing to describe the distribution of particle dimensions
How to use "particle size range" in a sentence
Basic
Advanced
particle size range
It is substantially a function of the particle size range of sand.
Each particle size range provides a different release stage.
The dispersions differed only in the particle size range of the celecoxib.
This particle size range is preferred for the following reasons.
Preferably the clay has a particle size range in the colloidal range.
A subsequent sieving step enables to select the desired particle size range.
The filler of such particle size range is easier to disperse in the varnish.
The adjustment of spraying operating conditions results in a strict particle size range.
The particle size range chosen is dependent on the intended use of the composition.
Preferably the lightweight fly ash aggregate is of a predetermined particle size range.
The particle size range of this material makes it useful in medium viscosity fluids.
The porosity can be adjusted by selection of the particle size range of the material.
The particle size range is defined by a combination of these upper limits and lower limits.
The operation may be repeated until the desired particle size range is achieved.
This particle size range allows for adequate flow during processing and content uniformity.
See also
The particles of the monomer composition are classified into an appropriate particle size range.
This would also meet the particle size range measured by laser diffraction.
The reference does not teach or suggest the benefits of a particular particle size range.
Most preferred is a particle size range below 5 microns.
The spray dried particles may be fractionated to select the desired particle size range.
A particle size range ratio of 3 is useful.
Homogeneous distribution of said crystals within each separate particle size range of the product.
Granulated absorbents with a particle size range of 2 to 5mm are especially preferred.
For some subsequent uses the salt may be advantageously in a certain particle size range.
The clays used herein have a particle size range of up to 1 micrometer.
The ideal feed for the process is a material with a very narrow particle size range.
The clays used herein have a particle size range of up to about 1 micron.
Alternatively the filter cake can be hot air milled to the desired particle size range.
Although clay particles are platy, a particle size range can be useful to describe them.
The resultant granules are milled using a Comill to achieve the desirable particle size range.
The nominal particle size range of the iron provided by the supplier was 7 to 9 microns.
The magnesium oxide may have the same particle size range as the iron oxide.
The preferred particle size range is either in the sub-micron range or the micron range.
However, this produces a much wider particle size range.
The extent of the catalyst particle size range allowed by the combined three-phase system ;.
Fractionation, for example by sieving, may be used to separate the required particle size range.
The portions outside the particle size range were milled again and re-used in subsequent granulations.
Therefore, it is necessary to determine the effect of particle size range in strength parameters.
Particle size range which assures a good local tolerance and a good suitability for sterilizing filtration ;.
Accordingly, solid, compositionally uniform particles having a predetermined particle size range can be obtained.
Based on this, an optimal particle size range has been established for SIN detection.
The cast or spray-dried solids are then milled to the desired particle size range.
Lactose EP D30 has a useful starting particle size range and acceptable flow properties.
The choice of the nature of the surfactant / solvent determines the particle size range.
This particle size range corresponds to a maximum dose of about 2 mg / l.
It is a one-step continuous process, which can directly produce desirable particle size range.
A preferred average particle size range is from about 2 to 8 microns.
Generally, arylene sulfide polymers as produced will fall within the desired particle size range.
In producing the sprayed heater elements, a particular particle size range is used for particular applications.
A preferred particle size range is about two micron to about 320 mesh.
You'll also be interested in:
Examples of using Size
Show more
Change duct size gradually to minimize turbulence
I do not want a comedian knowing my dress size
Size expressed as minimum and maximum weight
Examples of using Range
Show more
Desired range of visibility of the navigation light
They are out of range for ten hours
Time range for which recordings are available
Examples of using Particle
Show more
Ever since the particle accelerator exploded
Particle number sample mass flow rate
And the with particle below her
