Examples of 'parts of the tool' in a sentence
Meaning of "parts of the tool"
parts of the tool: This phrase refers to the components or pieces that make up a tool or device, essential for its functioning or operation
How to use "parts of the tool" in a sentence
Basic
Advanced
parts of the tool
Do not alter any parts of the tool or accessories.
Note that it is possible to apply only parts of the tool.
Only the active parts of the tool are shown.
Parts of the tool or the hose assembly can break or rupture.
Do not touch any metal parts of the tool to.
Check all parts of the tool for abnormal function.
These chemicals can damage the plastic parts of the tool.
Ensure that all parts of the tool are present and in good condition.
The linkage mechanism and other movable parts of the tool are.
Electrical parts of the tool may be repaired only by trained electrical specialists.
Do not use cleaning agents to clean the plastic parts of the tool.
The temperature of the different parts of the tool is controlled by regulation.
Never use caustic agents to clean the plastic parts of the tool.
These layers are parts of the tool structure that have different permeability.
Always keep the cord away from moving parts of the tool.
See also
The mat should cover all parts of the tool during the forming step.
Take care to avoid entanglement with the moving parts of the tool.
The essential parts of the tool are as follows,.
The participants had the opportunity to learn all parts of the tool.
Wipe the non-metallic parts of the tool with a dry cloth.
Never use water or other liquids to clean the electrical parts of the tool.
Store all parts of the tool in a clean, dry place away from heat and direct.
Never use solvents or other harsh chemicals for cleaning the nonmetallic parts of the tool.
Figure 2a illustrates assembly of the other parts of the tool to produce the rotatable unit.
Retracting a plunger that is covered with material may damage the internal parts of the tool.
The non-metallic parts of the tool.
Figure 8 is a simplified cross-section of the floor tool, showing the main parts of the tool.
Alternatively, all parts of the tool may be re-usable.
The same reference numerals denote similar parts of the tool 2.
Figure 4 shows the main parts of the tool 9 in perspective.
Never use grease for the maintenance / lubrication of parts of the tool.
Caution, do not touch any metal parts of the tool.
Other harsh chemicals for cleaning the non-metallic parts of the tool.
A retainer 61 prevents axial withdrawal of the interior parts of the tool from the housing.
Never use solvents or harsh chemicals to clean non-metal parts of the tool.
Use commercially-available universal oil to oil the moving parts of the tool.
Keep hands, wide clothing and long hair away from the moving parts of the tool.
Contact with a " live " wire will also make exposed metal parts of the tool.
Figures 4A to 4C form a schematic block diagram of further parts of the tool logic ;.
The parts 7 and 17 are the innermost parts of the tool.
The parts 2 and 12 are the outermost parts of the tool.
You'll also be interested in:
Examples of using Parts
Show more
Zero waste all parts of plant are used
All parts of the appliances can be replaced
Can not get parts for it now
Examples of using Tool
Show more
The tool is intended for blowing debris
Have your power tool ser v iced by a
Tool operates erratically or appears to be losing power
