Examples of 'passive tags' in a sentence
Meaning of "passive tags"
passive tags: This phrase could refer to meta-tags or elements used in programming or online content that are automatically generated or added without active input. These tags are often used for categorization or identification purposes
How to use "passive tags" in a sentence
Basic
Advanced
passive tags
Passive tags do not include a power source.
Both active and passive tags are known in the art.
Passive tags operate without an internal power source.
These tags usually contain a greater number of components than do passive tags.
They act as passive tags with respect to communication.
This collision probability naturally increases in dense networks with many passive tags.
Passive tags have the advantage of requiring no internal power supply.
Such RFID tags do not include an energy storage device and are called passive tags.
Passive tags obtain operating power generated from the reader.
He points out that the passive tags used in shops operate over a very short range.
Passive tags derive their energy from radio frequencies transmitted by readers.
UHF RFID using passive tags was chosen for the positioning.
Passive tags are ordinarily temporarily activated by the radio frequency scan of a reader.
Most existing passive tags signal by backscattering the carrier wave received from the reader.
Passive tags can generally be read by readers located at a relatively short distance.
See also
ConIdent passive tags require no power source and minimal maintenance.
Passive tags are more often used due to their compact size and lower price.
A variety of passive tags already exist which require to be pre-programmed during manufacture.
Passive tags must be powered up by the RFID reader before they can transmit data.
HF tags are passive tags and have short read range, less than 3 feet.
Most passive tags signal by backscattering the carrier wave from the reader.
The NFC uses passive tags to capture a nearby device ( less than 4in away ).
Passive tags send data only when they are in close proximity to the RFID reader.
Variety of passive tags watches, tags, keyrings, cards, bracelets etc.
Passive tags are typically read-only.
Since passive tags are cheaper to produce, they are meant to be disposable.
Passive tags typically comprise a transistor, antenna, and a coil.
Passive tags are powered by the transmitted interrogation signal of the reader 120.
Such passive tags do not transmit unless a signal is received by an interrogator 500.
You'll also be interested in:
Examples of using Passive
Show more
Provides a passive analog current output signal
The survey was supplemented by intensive passive surveillance
Passive aggressive is not a good look on you
Examples of using Tags
Show more
Name tags must be worn to all events
Check all the tags on the wall
Event tags will be required for entrance
