Examples of 'path loss' in a sentence
Meaning of "path loss"
Path loss refers to the reduction in power density of an electromagnetic wave as it propagates through a medium or over a distance, typically due to factors such as distance, absorption, and scattering
Show more definitions
- The attenuation of an electromagnetic wave as it propagates through space
How to use "path loss" in a sentence
Basic
Advanced
path loss
This is known as free space path loss.
Calculation of the path loss is usually called prediction.
One measure of channel quality is the instantaneous path loss.
Put up a path loss projection.
This is known as path loss.
The path loss is a value.
The second contribution to the path loss is attenuation.
The downlink path loss can then be estimated at any time.
The open loop scheme advantageously adapts quickly to path loss changes.
Subtracting the path loss from the total gain.
Path loss curve fitting may also be performed using a plurality of splines.
The second contribution to the path loss is given by attenuation.
Path loss may be calculated from signal strength if transmission power is known.
Signal strength and path loss are related but distinct quantities.
The fractional lines may therefore be called path loss border lines.
See also
The path loss.
Typical application of this model is to predict the path loss for microwave links.
Typically the path loss will be different for different wireless channels.
Sidetone path loss.
The path loss must be calculated with inclusion of the free space loss.
Loss or path loss.
The path loss and interference can be considered characteristics of the radio channel.
We have seen that the path loss is not always easy to predict.
This path loss is then an approximate measure of the distance between the two stations.
The threshold value can be a minimum path loss to qualify to use mPRACH.
The propagation path loss difference between those extreme users can be many tens of dB.
The result of this procedure would then yield a measure for the path loss.
System and method for determining path loss with hysteresis in a radio communication system.
This received power is the transmitted power of the base station times the path loss.
One of them is the average path loss which defines the borders of the zones.
The term x can be the measured path loss at UE.
See the article on path loss for more information on signal loss in wireless communication.
The exact level of interference depends on the path loss between the two cells.
The measured path loss is then a measure of the interference correlation between the two positions.
Time is improved in systems with consecutive channel path loss difference exceeding the interpolation error.
A large path loss indicates that the user device is far from the base station.
The simulation results show a system able to respond to both path loss and interference changes.
The UEs with path loss higher than this threshold can use mPRACH for access.
The BCH channel was used for the path loss estimate.
RSRP and path loss measurements with coverage enhancements.
This thesis compares geolocation accuracy using different PDOA algorithms and different path loss models.
The path loss method described above with reference to FIG.
Based on in part the received power level, a path loss is determined.
PL is the downlink path loss estimate calculated in the UA in dB.
As the carrier frequency increases, the path loss also increases.
Also, path loss depends on the media traversed.
A, is a weighting parameter that represents the quality of path loss measurements.
The path loss in this case is highly frequency-dependent.
This is a relatively small increase in path loss that is easily offset by,.
Due to severe path loss in mmWave communication, beamforming is typically used.
You'll also be interested in:
Examples of using Loss
Show more
The loss of a huge amount of farmland is threatening
We have all suffered loss of those closest to us
Loss of unemployment benefits due to refusal of work
Examples of using Path
Show more
He crosses her path on the observation deck
Another good agent going down a bad path
An absolute path to the file is allowed to use