Examples of 'pcell' in a sentence
Meaning of "pcell"
Pcell - a noun representing a specific name, title, or object. It is commonly used in technical contexts such as technology, engineering, or telecommunications
How to use "pcell" in a sentence
Basic
Advanced
pcell
The PCell is also called a reference cell.
The video below provides an introduction to pCell.
The PCell always serves as a special cell.
All UEs have one PCell.
The PCell may always be activated.
Flow control is performed between PCell and SCell.
A PCell and an SCell may be used as serving cells.
No cell reselection upon SCell failure is needed as long as PCell connection retains.
The PCell may be a cell indicated during handover.
The term serving cell comprises both PCell and one or more SCells.
The PCell can not be deactivated.
This will lead to that the user equipment declares radio link failure on the PCell.
At least one PCell is configured always.
Pcell is the special cell.
The configuration of the PCell and SCell may vary for each terminal.
See also
A PCell is a piece of programming code.
All the cells except the PCell aggregated by the UE are SCells.
The PCell may refer to a cell indicated during handover.
The random access preamble may be transmitted to guarantee UL synchronization in PCell.
The PCell is always activated.
The CSI reporting may be performed periodically in a PCell configured in a licensed band.
The PCell and the SCell may from different eNBs.
Independent schedulers and PHY layers are used on the PCell and SCells.
Both a PCell and an SCell may be collectively referred to as a serving cell.
There may also be failure in one or more attempts to transmit PCell PRACH.
The PCell can be handed over only through a handover process.
The PDCCH may be monitored in a common search space of a corresponding subframe in a PCell.
The PCell and the SCell may collectively be referred to as a serving cell.
The higher priority may be allocated only for the PCell of the MCG.
The PCell may send a message to designate a PPCell among cells in the second cell group.
The UE can send and receive data both on the PCell and SCells.
A UE may use a PCell for initial connection establishment or connection reestablishment.
This will be used as a seed value for the RTT delay between SCell and PCell.
The PCell is the first cell that the UE establishes RRC connection with.
The first PUCCH cell may be the PCell.
Thus the DRX parameter configurations of the Pcell and the Scells may be the same.
The UE sets the SR transmission power in consideration of the pathloss of the PCell.
PCell is used for transmission of PUCCH.
The term Serving Cell comprises both PCell and SCells.
PCell can be referred to as Serving Cell in the present application.
Separate DRX retransmission timers may be set for each of the Pcell and Scells.
In this case, PCell may not participate in the CoMP operation.
In case there is single UL CC the PCell must be on that CC.
Non-access stratum information is taken from the downlink PCell.
SCell may send the RLC PDUs TRANSMIT STATUS message to PCell with the latest transmission status.
At this time, the PCell does not always need to participate in CoMP operation.
The characteristics of the downlink and uplink PCell are,.
There is only one PCell, and the PCell is always activated.
What is the meaning of the pcell and scell?
There is only one PCell, and the PCell is always in an active state.
