Examples of 'peak amplitude' in a sentence
Meaning of "peak amplitude"
peak amplitude: In the context of waves or signals, this phrase denotes the maximum magnitude or strength of the wave's fluctuation from its average value. For example, 'The peak amplitude of the sound wave was measured at 120 decibels.'
How to use "peak amplitude" in a sentence
Basic
Advanced
peak amplitude
Peak amplitude of the modulated signal.
The signal peak to peak amplitude is dS.
The peak amplitude of a previous pulse.
Such components are marked considering the largest peak amplitude.
Other peak amplitude detection methods may be used.
Numerous specific embodiments are available to reduce the peak amplitude.
Peak amplitude of an elementary echo.
The third section of the transient detector is a peak amplitude detector.
Data points represent the peak amplitude of the measured chloride currents.
These two peak values will be located temporarily on each side of the peak amplitude.
The peak to peak amplitude of the triangular wave is twice the reference voltage.
The signal level detector indicates the peak amplitude of the signal level.
The plucking action gives it a sudden attack characterized by a rapid rise to its peak amplitude.
This impedance determines the peak amplitude of the current and the resonance oscillation.
In a first embodiment, the current measuring device is a peak amplitude detector.
See also
The peak amplitude of the excursion depends on the signal strength and may vary substantially.
The variable threshold is generated as a function of the peak amplitude of the total signal.
The peak amplitude of the DC pulse is a function of cell volume.
The differential signal amplitude is found by determining the peak amplitude of the differential signal.
Typically, this peak amplitude occurs at or near the center of each symbol.
The PK detector module may be arranged to determine peak amplitude of the received pulse.
Said peak amplitude threshold is exceeded for a period greater than said peak width threshold ;.
For instance, a signal with a peak amplitude of has a of.
A peak amplitude detector for a sinusoidal signal, comprising,.
Additionally, all window functions shall be normalized to a peak amplitude of one.
Selecting a maximum peak amplitude from among the peak amplitudes ;.
The value specified by users is e.g. equal to one thousandth of the peak amplitude.
In addition, a signal proportional to the peak amplitude of an event is also recorded.
The average peak amplitude of current i2 during the black picture is approximately 2.2 amps.
Comparing an amplitude of the endocardial signal to the peak amplitude threshold ; and.
A method of detecting the peak amplitude of a sinusoidal signal, comprising the steps of,.
In a first embodiment, the current measurement stage or device is a peak amplitude detector.
For a sine wave, peak amplitude and semi-amplitude are the same.
The digitized endocardiac signal amplitude exceeding said peak amplitude threshold ; and.
Peak amplitude levels were also estimated ( at 0 dB level ) using the ESP.
During bending, the acoustic counts and peak amplitude are also recorded.
The peak non-specific signal component was typically less than 15 % of the maximum signal peak amplitude.
Half-cycle and has a peak amplitude of 1 volt.
All of the signatures in figure 3 were normalised for display to a common peak amplitude setting.
Peak Amplitude ( PA ) - The amplitude of the peak of a plethysmograph signal.
After the transition to a white picture, the average peak amplitude of current i2 increases.
The peak amplitude corresponds to 0.8 atom per cent for sample 2.
Importantly, this sharper pulse was obtained with little loss of peak amplitude of the pulse.
Inductor L3 limits the peak amplitude of a short circuit current is of FIGURE 2j.
In a low noise environment, the peak frequency and peak amplitude arrays may match.
Next, the peak amplitude array is correlated with the peak frequency array at step 524.
Apparatus according to Claim 1 further characterized in that said peak amplitude determining means comprises,.
The maximum peak amplitude is K ( 1+a ), and is constrained not to exceed normal safety levels.
The threshold T is assumed to be positive ( like the peak amplitude A of the input I ).
A sinusoidal force having a peak amplitude of about 20,000N constitutes an acceptable compromise on this point.
You'll also be interested in:
Examples of using Peak
Show more
Week at peak losses death and cull
I am prepared to give you a little sneak peak
Active hedging of peak exposures through retrocession
Examples of using Amplitude
Show more
A freedom of such amplitude involves risks of abuse
Amplitude of the fundamental of the receiver current
These are signals the amplitude of which is significant
