Examples of 'peak melting' in a sentence
Meaning of "peak melting"
peak melting - reaching the highest point of melting, often used metaphorically to describe a climax or peak of a situation
How to use "peak melting" in a sentence
Basic
Advanced
peak melting
Tmax means the peak melting temperature.
Peak melting temperatures were also noted.
Tm means the peak melting temperature.
It is obtained from the cooling curve and is the peak melting temperature.
The peak melting temperature was recorded.
The heating may be carried out above or below or at the peak melting point.
Peak melting points of the matrix phase and oriented phase were thereby determined.
Said net is a blend of plastics having different densities and peak melting points.
The peak melting point is the maximum endotherm for a particular melting transition.
True equilibrium melting points would be higher than the DSC peak melting points.
This equation predicts the peak melting temperature of a polymer as a function of soluble components.
If a sample exhibits multiple peaks, then multiple peak melting points will be reported.
The peak melting point values reported in the Tables come from the second heating cycle.
The term " annealing " refers to heating the polymer above or below its peak melting point.
The melting temperatures are the peak melting points from the second heat unless otherwise indicated.
See also
The percent crystallinity is calculated from both of, Low peak melting point, Tm1a.
The peak melting temperature of the lowest melting PHA is referred to herein as Tm ( PHAa ).
The binding strength is related to the peak melting temperature as shown in Table 13.
The polymer peak melting temperature is displaced downwards, along with the MIT.
Figure 3 illustrates tensile modulus versus DSC peak melting point of polypropylene copolymers.
The peak melting point ( Tm ) of the non-isothermally crystallized specimens decreased with increasing cooling rate.
Sample G4 also looked like a broad two peak melting endotherm, albeit rather broad and noisy.
The peak melting temperature of the fibers as measured by differential scanning calorimetry ( DSC ) was 289°C.
Tm - Melting point - the peak melting temperature.
Peak melting point °C.
The percent crystallinity was calculated from both of, Low peak melting point, Tm1a.
Preferably, it has a peak melting point of at least 5°C below that of the membrane.
Preferably the thermoplastic polyolefin resin has a peak melting point of at least 100°C.
High peak melting point, Tmlb.
A thermoplastic vulcanizate composition according to claim 1 wherein said peak melting temperature is from 30 to 105°C.
Typically, the potting compound has a peak melting point at least 5 °C below that of the fibers.
DuPont de Nemours of Wilmington, Delaware which has a peak melting point of about 270°C.
More preferably, the potting resin has a peak melting point of less than about 260°C.
You'll also be interested in:
Examples of using Melting
Show more
All the wax was melting on the trees
Melting temperature of glue stick too low
An unusual amount of melting ice at both poles
Examples of using Peak
Show more
Week at peak losses death and cull
I am prepared to give you a little sneak peak
Active hedging of peak exposures through retrocession
