Examples of 'peak-to-peak' in a sentence
Meaning of "peak-to-peak"
peak-to-peak (noun) - the difference in amplitude between the maximum and minimum values of a waveform, signal, or oscillation. In electronics and physics, it is commonly used to describe the voltage or current levels in a periodic waveform
How to use "peak-to-peak" in a sentence
Basic
Advanced
peak-to-peak
The predetermined amount may be a predetermined fraction of the peak-to-peak value.
The wire undulation pitch is p and the peak-to-peak amplitude of its undulation is e.
The peak-to-peak differentiated output signal is reduced under high average currents.
The reflected angle as a function of position is calculated for different peak-to-peak separations.
This peak-to-peak amplitude can be measured to determine the envelope of the waveform.
Horn displacement amplitude refers to the peak-to-peak excursion of the horn face.
The relative peak-to-peak size of the index ripple can vary depending on the dopant used.
The voltage comparator must function on the full peak-to-peak range of the triangular wave signal.
The peak-to-peak voltage is substantially equal to twice the supply voltage of the class D amplifier.
The laminate dessicant sheet and spacer sheet peak-to-peak thicknesses were measured using a micrometer.
Ripple voltage is usually specified peak-to-peak.
It is ensured that the peak-to-peak amplitude of the signals A and B are the same.
There are all kinds of creeks around the peak-to-peak.
Peak-to-peak phase difference between related information.
It is pointed out that the maximum peak-to-peak amplitudes are adjacent.
See also
The peak-to-peak amplitude of the signal is unchanged.
Such a condition is only possible with regular peak-to-peak connections.
The measured peak-to-peak pressure change for sample i.
The decrease in current in transistor 65 results in a decrease in peak-to-peak output response.
The maximum peak-to-peak pressure changes are tabulated below.
Simple light microscopy can be used to measure average peak-to-peak distance.
Advantageously, the peak-to-peak detection circuit is a double correlated sampler.
Alternatively or additionally, the electrical activity includes a peak-to-peak value of a local electrogram.
The modulating current is 4 mA peak-to-peak and leads to a frequency excursion of approximately 2 GHz.
Concentrations of iron-nitrosyl-hemoglobin were calculated by comparing the peak-to-peak heights to a standard sample.
Figure 8 illustrates the peak-to-peak δT phase variation of the pulses coming from generator 2.
The swing characterizes the variability of the excitation current, typically the peak-to-peak amplitude.
The resulting output has a peak-to-peak period jitter of less than 6 ps.
The peak-to-peak deflection of the coil tip was measured for each current level.
Horn displacement or amplitude is the peak-to-peak movement of the horn face.
The torques are peak-to-peak values and relative values ; that is, percentages of the nominal torque.
In the present embodiment, the samples correspond to the peak-to-peak amplitude of an oscillating signal.
Note that the peak-to-peak amplitude of current i ₃ for the center scanning example is higher.
Thus, different types of cardiac tissues may be identified based on the measured peak-to-peak voltage.
For the lateral displacement, the average peak-to-peak distance between the lateral displacements is determined.
Still in a preferred embodiment, said device for processing said electric signal comprises a peak-to-peak detector.
Preferably, the identification area has a peak-to-peak roughness larger than the quarter of the laserʼs wavelength.
Impedance-matching means connected between said conversion means and the input of said peak-to-peak detection means ;.
RRO can be expressed as the peak-to-peak value as well as harmonic values.
The NHA signal is processed to calculate the peak-to-peak value.
Thus, a peak-to-peak detection is carried out on the input signal Vin.
Video signals may exhibit signal amplitudes approaching 2V peak-to-peak.
Pk-Pk is the peak-to-peak variation of basis weight for each run expressed as a percentage.
That leads to an oscillation of the output signal with a peak-to-peak value of 1 LSB.
Full peak-to-peak amplitude SVM drive would be immediately restored to output amplifier stage 34.
The image signals have a standardized peak-to-peak amplitude varying between 0 and 1 Volt.
Average Peak-to-Peak Distance Simple light microscopy can be used to measure average peak-to-peak distance.
Okay . Copper creek runs parallel to the peak-to-peak highway for several miles, but it does.
The circuit shown in Figure 4 provides a highly linear triangular wave with consistent peak-to-peak amplitude.
The distributions of peak height, peak diameter and peak-to-peak distance, respectively, are presented in Fig.
