Examples of 'pedal force' in a sentence
Meaning of "pedal force"
pedal force: This phrase pertains to the amount of pressure applied to a pedal, typically in reference to a bicycle or musical instrument. It describes the physical effort exerted by pressing down on the pedal to generate motion or sound
How to use "pedal force" in a sentence
Basic
Advanced
pedal force
Preliminary snubs to determine pedal force.
Make pedal force visual.
Vehicle deceleration to brake pedal force.
Brake pedal force.
A brake booster was used to reduce the pedal force.
Accuracy of pedal force and disc temperature measurements shall be as follows.
The occurrence of brake judder depends on the pedal force.
Initial pedal force.
No pedal force is required.
This shall be measured as the brake pedal force is increasing.
This change in pedal force controls whether or not kickdown should be performed.
Requires low pedal force.
Pedal force is applied and controlled by a skilled driver or by a mechanical brake pedal actuator.
Accelerator pedal force.
Fig . 5A is a chart of pedal force versus pedal travel for a typical conventional boosted brake system.
See also
The principal selected criteria has been the pedal force or pedal speed.
Pedal force characteristic needed in order to achieve maximum deceleration with category " A " BAS.
The vacuum booster augments operator applied brake pedal force to said master cylinder piston.
Figure 1b, Pedal force characteristic needed in order to achieve maximum deceleration with category " A " BAS.
Depress the brake pedal a little more strongly because the pedal force may be insuffi cient.
The Regulation specifies pedal force to be applied during the type-0 test.
That is to say, no assist power is provided unless the pedal force is applied.
Initial pedal force FABS, lower.
Ebike sensors rotation sensor, speed sensor, pedal force sensor.
Brake pedal force ( or hydraulic line pressure ) ;.
This friction introduced mechanical hysteresis into the pedal force versus pedal position transfer function.
Ebike sensors rotation sensor, Shift Sensor, speed sensor, pedal force sensor.
Some Category B systems similarly use pedal force to avoid the unintentional activation.
The output of the sensor 12 diagramatically shown on line 16 is a pedal force input signal p ( in ).
The brake pedal sensor 94 detects a pedal force ( brake pedal force ) on the brake pedal.
Vehicle speed ( ii ) Brake pedal force.
You'll also be interested in:
Examples of using Pedal
Show more
Release the clutch pedal manual transmission
Pedal fully depressed forward drive disengaged
Push the brake pedal completely forward
Examples of using Force
Show more
With the sheer force of the blast
Force them to tell us where the shards are
Excessive use of force by law enforcement officials
