Examples of 'peel force' in a sentence
Meaning of "peel force"
Peel force: A term used in physics to describe the force required to peel an object or material apart from another surface
How to use "peel force" in a sentence
Basic
Advanced
peel force
Peel force does not drastically increase over time.
The substrate was unaffected in the application of the peel force.
The peel force recorded is a measure of the strength of bond.
Yet another investigation was conducted in regards to peel force reduction.
Paper with weak peel force may result in paper jam.
The tensile tester was used in determining the peel force.
The low peel force is desired for consumer handling purposes.
Further studies were performed to determine the peel force of various treatments.
The peel force in terms of grams is recorded as a function of peel distance.
The results are expressed as average peel force per unit width.
The first peel force is less than the second peel force.
The release liner may be optionally siliconized as appropriate to adjust peel force optimally.
The procedure for the peel force test used is described as follows.
Formulation C This is the modification targeting a decreased peel force.
Low peel force surface protection film and method of using same.
See also
Formulation B This is the modification targeting an increased peel force and a better hottack behaviour.
The peel force of each composition was then determined utilizing the procedure described above.
Upon further moistening, the peel force decreases.
The third peel force can be higher or lower than the second peel force.
Figure 9 is a graph illustrating the relationship of peel force to sidedness.
The peel force measured by the TLMI is recorded.
As the density of release agent decreases, the peel force decreases.
The end seal peel force being stronger than the peel force of the label PSA.
Conversely as the density of release agent increases, the peel force increases.
The peel force is measured according to the Peel Adhesion Test Method.
The initiation área 75 comprises a releasable adherence having a first peel force.
The higher the peel force was, the better the tack strength was.
Specifically, the effect of flow channels in an adhesive layer upon peel force was investigated.
To initiate removal, the peel force provided by the releasable adherence must be overcome.
The test method is a pass / fail procedure and does not measure a peel force.
Hence, its margin is smooth and any peel force may hardly be applied thereto.
Thus, a more aggressive adhesive may be required to overcome this undesirable peel force.
The low peel force is possible because of the non-aggressive nature of a gel substance.
The samples were initially peeled apart and opened, the peel force required being measured.
This provides higher peel force resistance, reducing the tendency for peel mode failure.
The remaining área 85 of the removable section comprising a releasable adherence having a second peel force.
Sample 30 had significantly lower average peel force values compared to the other test samples.
The peel force values are measured through the use of a strain-gauge mounted on a motor-driven carriage.
The C1 formulation had a relatively low level of surface tack, and remarkably yielded a high peel force.
Average peel force is reported in Table 2.
The tester records the average peel force in N / dm.
Data on peel force relative to human skin are shown in Table 5.
Figure 3 is a peel force chart.
In one embodiment, the remaining área 85 comprises a third peel force.
Figure 5 is a graph of peel force reduction for various samples evaluated in Example 1.
The strength of the adherence can be measured by the peel force at the interfaz 110.
Table 1 shows the peel force in grams as determined using the Test Method below.
Strips 1-3, without the behenamide exhibited much higher and undesirable values in both peel force tests.
Results were taken as grams of peel force per millimeter width of the tape ( g / mm ).
Peel force was measured by a 50 Newton load cell.
You'll also be interested in:
Examples of using Peel
Show more
Do not peel the fruit before drying
And then he will want me to peel a banana
Peel the onions and dice them
Examples of using Force
Show more
With the sheer force of the blast
Force them to tell us where the shards are
Excessive use of force by law enforcement officials
