Examples of 'percent solids' in a sentence
Meaning of "percent solids"
Percent Solids: A term used to indicate the concentration of solid particles in a liquid or mixture, expressed as a percentage of the total volume
How to use "percent solids" in a sentence
Basic
Advanced
percent solids
The conversion to copolymer was followed by percent solids.
The percent solids is recorded versus time of crystallization.
The eluate is about fifteen percent solids.
The percent solids in the resultant solution is then measured.
The percentages are percent solids.
Consistency refers to percent solids of a nascent web, for example, calculated on a bone dry basis.
The drain water was weighed and the percent solids determined.
The next day the 55 percent solids dispersion is filtered through a coarse paint filter.
The coatings were then diluted with isopropyl alcohol to various percent solids.
All percentages refer to percent solids in the respective treatment solution.
Azeotrope can be removed to give a lower percent alcohol and higher percent solids.
This same definition of percent solids is used for all purposes in the invention.
The resulting final specimen weights were averaged and the weight percent solids calculated.
EXAMPLES For all examples the percent solids were determined as follows.
The latex contained approximately fifty - percent solids.
See also
Solutions with 60 or more percent solids by weight can be dried by the present method.
The modified reactive polyamide is introduced as a 50 percent solids dispersion in water.
Density, viscosity, and percent solids test were run on the system immediately following the pour.
Sufficient dionized water is added to obtain the percent solids desired for the mixture.
Density, viscosity, and percent solids test were performed on the system immediately following the pour.
This translates to the ability to pump higher percent solids of material with less water.
The slurry concentration in the waste dissolution reactor was maintained at 40 percent solids.
As the centers migrate, the percent solids increase.
Each sizing formulation was duluted with deionized water to about 15 weight percent solids.
The reaction mixture was then adjusted to 80 percent solids with methyl isobutyl ketone.
High acid content is not a requirement for preserving foods concentrated to over 70 percent solids.
Solution density, viscosity, and weight percent solids were measured immediately after the resin was collected.
Depth media is generally defined in terms of its porosity, density or percent solids content.
Numbers in parentheses indicate percent solids by weight within the formulation . TABLE I.
The compounds were prepared in an aqueous solution having less than 5 percent solids by weight.
Percent solids was determined by light scattering at 500 nanometers.
The resulting polymer solution was diluted with heptane to give a 21 percent solids solution.
The polymers were diluted to 15 percent solids with toluene prior to coating.
The organic solvents were removed from the latex in vacuo to obtain a 50 percent solids latex.
See Table 3 that correlates sag with percent solids of the coating compositions.
Percent solids assay was performed and the bead mixture was diluted to 10 mg / mL.
The final product was a dark liquid having the percent solids listed in Table 2.
The actual percent solids of the washed suspension was determined by " loss on drying . ".
The UF polymer dispersion at about 38 weight percent solids should be agitated during its storage.
Condensed skim milk usually contains about 32 weight percent solids.
Enamels were prepared at 50 weight percent solids with xylene as solvent.
Meanwhile, the extract was concentrated by vacuum evaporation to about 35 percent solids.
The entire bath was reduced to 10 percent solids using deionized water.
The percent solids in the regeneration tank was found to be about 4-6 percent by weight.
The product contained approximately 50 percent solids.
The dispersions were diluted to 2.5 percent solids and additional test panels were coated.
The resulting polyurethane latex had 33 percent solids.
Due to the high percent solids that can be sprayed, only 8 passes are required.
The millbase was dissolved at 30 weight percent solids in toluene.
Component E - A 33 weight percent solids solution of a poly ( vinyl acetate ) homopolymer dissolved in styrene monomer.
You'll also be interested in:
Examples of using Percent
Show more
One hundred percent successful delivery rate
Management wants us to cut another ten percent
I will give you ten percent of my winnings
Examples of using Solids
Show more
The solids feared our metamorphic abilities
A sieve separates solids from used liquids
Solids liable to become liquid during transport
