Examples of 'photopolymer' in a sentence
Meaning of "photopolymer"
Photopolymer is a type of material that hardens when exposed to light, commonly used in 3D printing, printing plates, and other manufacturing processes
Show more definitions
- Any polymer that reacts to light with a physical or chemical change, used especially for teeth fillings
How to use "photopolymer" in a sentence
Basic
Advanced
photopolymer
Photopolymer can be used to prepare dielectric materials.
The resolution is the same as with photopolymer.
The type of photopolymer is generally not important.
It turns out the reflective surface is a photopolymer film.
Some systems use a photopolymer in place of the crystal.
Photopolymer printing form with reduced processing time.
An exemplary monomer used in the photopolymer composition is acrylamide.
Black photopolymer used in PolyJet technology.
The deflection member is made using photopolymer lithography.
The photopolymer composition may include a polymerisable comonomer.
Processless digitally imaged photopolymer elements using microspheres.
The photopolymer is expensive and nonrecyclable.
The final polymer is not a photopolymer.
Direct exposure of a photopolymer using a laser is also known.
Developing away the unpolymerized photopolymer.
See also
Method of preparing a photopolymer polymer which method comprises.
Photopolymer plates are light sensitive.
These are generally known as photopolymer plates.
Photopolymer printing plate precursor.
Such compositions are known as diazo photopolymer hybrid compositions.
The photopolymer sheet is then cured by exposing it to ultraviolet radiation.
Ensures delivery of high quality photopolymer for printing.
A photopolymer is a large molecule whose properties change when exposed to light.
The printing plate is nowadays manufactured from photopolymer or rubber.
The final photopolymer is a solid.
Plate precursors based chemical crosslinking or polymerisation of a photopolymer coating.
This creates high quality photopolymer plates with certain thickness.
Specific design might be achieved using a designed photopolymer plate.
The base photopolymer molecule did not contain either alkyldialkanolamine or acrylate.
Layers of the fused powder are processed sequentially as in photopolymer lithography.
The blend of the photopolymer and the complexing polymer is dispersible in water.
This process forms a relief image on the photopolymer plate.
The photopolymer composition may and preferably will include an aromatic olefin.
After that a backing layer is applied to adhere to the photopolymer.
Machine for insulating and cooling photopolymer plates for flexographic printing.
Filament formation and propagation may also be observed in photopolymer systems.
Some manufacturers use sheets of photopolymer resin instead of rubber to make stamps.
Covered on one side with a dry layer of acrylic photopolymer resin.
The cured photopolymer was smooth and dry to the touch and translucent.
Digital engraving in photopolymer.
Liquid photopolymer solder masks for use as a permanent coating for printed circuits.
Layers of the fused powder are processed sequentially like photopolymer lithography.
Photopolymer systems relying on the photochemical liberation of a basic species are often oflow photosensitivity.
Silicone stamps have many of the same properties of the photopolymer stamps.
A platform rests in a bath of a liquid photopolymer or resin just below a surface of the bath.
Such development is generally accomplished by positioning a mask or negative on the photopolymer layer.
The other side of the photopolymer retains the polyester film carrier sheet.
This object is realized by adding a colorant to the coating of the photopolymer plate.
A typical photopolymer printing plate precursor comprises a photopolymerizable coating provided on a hydrophilic support.
The floor layer comprises a silicone bound into the network of a photopolymer.
