Examples of 'pilot arc' in a sentence
Meaning of "pilot arc"
A pilot arc is a type of plasma arc used in welding and cutting processes. It involves the use of a high-frequency circuit to create a low-current arc between the electrode and the workpiece, allowing for easier starting and better arc stability
How to use "pilot arc" in a sentence
Basic
Advanced
pilot arc
Excessive pilot arc ignitions in the air.
Pull the trigger to energize the pilot arc.
The pilot arc starts immediately when.
Press the torch trigger to start the pilot arc.
Torch has pilot arc but does not cut.
Some of the modern plasma cutter uses pilot arc torch.
Form the pilot arc outside the part.
High frequency is only required for the initial pilot arc striking.
The pilot arc is struck as follow.
Striking circuit of the pilot arc for plasma arc torches.
The pilot arc time adjustment can be modified by prolonging it.
Plasma arc ignition is achieved by a pilot arc which remains on at all times.
The pilot arc will start.
Keep away from torch tip and pilot arc when trigger is pressed.
The pilot arc is struck by energizing a first electrovalve solenoid valve.
See also
Make sure the power and pilot arc cable connections are wrenchtight.
The pilot arc goes out automatically after two seconds if no cutting is done.
Press the key pad to recall and regulate the intensity of pilot arc.
This turns off the pilot arc and immediately transfers the arc.
As previously, conventional means are used to initiate this pilot arc.
In practice the pilot arc windings have a higher turn ratio than the cutting windings.
Means for switching from a pilot arc to a main arc ;.
A pilot arc with a small amount of current being generated ;.
Restarting of the Pilot Arc for uninterrupted cutting.
Two seconds after depressing the torch switch, the pilot arc should start.
DO NOT initiate pilot arc while checking air quality.
If the torch trigger is pressed during the post-flow, the pilot arc will restart.
Avoid keeping pilot arc uselessly on, in air to avoid electrode, diffuser and nozzle consumption.
Self Restart mode LED pilot arc automatic restart.
The pilot arc can cause burns - keep away from torch tip when trigger is pressed . Wear.
When the gas purge is complete, pilot arc will be initiated.
Fig . A shows a pilot arc prior to transferring the arc to the work piece.
When cutting is completed, keep the knob pressed and the pilot arc will restart automatically.
Air flows, Pilot arc does not start.
Blinks slowly if cutting arcs not initiated after 3-second pilot arc ignition.
Traditionally, a large resistor in the pilot arc current path created this voltage potential.
Pilot arc relay 1.
L4 - Green light indicating pilot arc process timed two seconds.
CUTTING, - Do not freely or unnecessarily ignite the pilot arc when not cutting!
The blown or pilot arc current is 85 amperes.
Fitting 52h provides a passage for a pilot arc wire into the plasma torch body 62.
In operation, pilot arc P has a voltage of approximately 150 volts.
You'll also be interested in:
Examples of using Pilot
Show more
Pilot projects on payments for ecosystem services
Implementation of pilot projects to develop plant cover
Pilot flew into a mountain in the fog
Examples of using Arc
Show more
A plasma arc can damage frozen pipes
Allows you to obtain different arc dynamics
Arc voltage too low or too high
