Examples of 'pilot flame' in a sentence
Meaning of "pilot flame"
pilot flame ~ A pilot flame is a small, continuous flame that is used to ignite the main burner of a gas appliance. It is typically kept burning at all times, serving as a stable source of ignition. The pilot flame is essential for the proper functioning and immediate ignition of the main burner when required
How to use "pilot flame" in a sentence
Basic
Advanced
pilot flame
The pilot flame must be visually checked.
This appliance does not have a pilot flame.
The pilot flame must remain alight.
Check for proper size of pilot flame.
Pilot flame shrinks when fire is on high.
At this level a pilot flame would develop.
Pilot flame not touching the thermocouple.
Proper operation depends on a good pilot flame.
Replace control if pilot flame is present when gas.
Pilot flame must be high enough to heat thermocouple.
For lighting the pilot flame push button.
See pilot flame troubleshooting above.
Electronics continue to spark after positive pilot flame.
Pilot flame is not large enough.
Until the pilot flame is correct.
See also
Pilot flame power requirement if applicable.
Check for a good pilot flame.
Permanent pilot flame power requirement.
Replacing the nozzle of the oven pilot flame.
The pilot flame day five.
This flange causes a turbulence in the pilot flame.
Pilot flame lights but there is no main gas flow.
Ensure that no logs are placed in front of the pilot flame.
The incorrect pilot flame is not touching the thermocouple.
It shuts off the main burner and goes down to a pilot flame.
The pilot flame in turn lights up the main flame.
The burners are lit simultaneously by a pilot flame or an electrical ignition device.
A pilot flame is used to cause the ignition of pyrolysis gas.
The burner unit consists of a pilot flame and a combustion chamber.
Pilot flame is not large enough or not engulfing the thermopile.
Check that the pilot flame comes into contact with.
Replacing the nozzle of the oven or solid top pilot flame.
The pilot flame should be seen through each pilot hole.
Look through the glass to see whether the pilot flame is burning.
Check pilot flame pattern and burner flame pattern often.
Installing the battery for the electronic ignition of the pilot flame.
Visually inspect the pilot flame and burner periodically during use.
Turn inner adjustment screw clockwise to decrease or counterclockwise to increase pilot flame.
Examine the pilot flame before and during each heating season.
Variable control knob can be released after the pilot flame lights.
The pilot flame operates with a fixed nozzle and fixed air.
Release the variable control knob after the pilot flame lights.
The pilot flame should be blue with little or no yellow on the tips.
The ignition is switched off when the pilot flame signal is generated.
Measure the pilot flame from its lowest point to the tip.
The fuel ignition system can include a spark igniter or a pilot flame.
The pilot flame can be observed by opening the pilot lighting hole cover.
Ignition of the burners is conveniently achieved by means of a pilot flame or a piezoelectric spark.
The pilot flame and the spark gap are factory checked and tested.
This will extinguish both the pilot flame and the main burner.
You'll also be interested in:
Examples of using Pilot
Show more
Pilot projects on payments for ecosystem services
Implementation of pilot projects to develop plant cover
Pilot flew into a mountain in the fog
Examples of using Flame
Show more
Flame retardant materials bear the mark
Envision the flame burning within you
Flame disk or combustion heads dirty or worn
