Examples of 'pipe diameters' in a sentence
Meaning of "pipe diameters"
relates to the measurements or sizes of pipes, specifically the internal diameter of a pipe. It is used in fields such as plumbing, engineering, and construction to specify the dimensions of pipes for proper installation and flow of liquids or gases
How to use "pipe diameters" in a sentence
Basic
Advanced
pipe diameters
For bigger pipe diameters just contact us.
Temperature measurement in very small pipe diameters.
Pipe diameters will depend on flows.
The dimensions refer to outside pipe diameters.
Verify that the pipe diameters are properly selected.
This is measured in terms of pipe diameters.
The range of pipe diameters for each pipe system does vary.
Use sealing strip for deviating pipe diameters.
Smaller pipe diameters will restrict capacity of pump and reduce performance.
For facilities with pipe diameters from approx.
Transducers available for a wide range of inner pipe diameters.
Smaller pipe diameters will restrict the capacity of the pump and reduce performance.
Use sealing strips for different pipe diameters.
Carry on reducing the pipe diameters until you ´ ve optimised the system.
It is possible on request to supply supports for larger pipe diameters.
See also
A diffuser is placed less than five pipe diameters downstream of the curved line section.
The amplitude of these buckles is typically several pipe diameters.
EFC is available for all pipe diameters and connections.
There is also a maximum practical depth for specific pipe diameters.
This method is applied for tube and pipe diameters from around 5 mm to several metres.
The table below lists the torques recommended for the various pipe diameters.
The large pipe diameters at high temperature ( hot oil system ) were a key point of attention.
Vacuum collection systems enable significant space savings as pipe diameters are much smaller.
The invention also applies to pipe diameters other than 4 inch as used in this example.
A coupling device formed with a radially displaced hinge thus adapts itself to changing pipe diameters.
Large pipe diameters with higher loads can be installed with two-screw heavy-duty pipe clamps.
Outstanding extraction performance by means of a fast, strong hydraulic system and large pipe diameters.
If pipe diameters differ, Use sealing strips.
Two-part fixed-point pipe clamp matched to the corresponding steel pipe diameters.
The pipe diameters in inches in this situation should not be less than 6.3.
The length of the inner pipe of the piping adaptor 23 is typically two pipe diameters.
For process pipe diameters 10 inches.
Therefore, ordinary vortex flowmeter should be installed only after many pipe diameters of straight pipe.
In general, pipe diameters of between 1 and 35 cm are employed.
At this point, it is worth considering different pipe diameters downstream of the PRV.
The containment structure of claim 20 in which the transition zone occupies less than 50 pipe diameters.
Typical upstream values are 10 to 15 pipe diameters and downstream values are 5 to 10 straight pipe diameters.
Poland, Safety and cost-effectiveness are the criteria for choosing pipe diameters and materials.
Fitted with hose clamp which is included for pipe diameters up to 300 mm.
Turndown 4:1, and a straight run requirement of eight pipe diameters up stream.
Typically, the reboiler inlet line is a sump that is 1.5 pipe diameters deep.
You'll also be interested in:
Examples of using Pipe
Show more
Pressure transmission pipe in the combustion chamber
Pipe is the heaviest wave in the world
Two pieces of pipe and a bicycle chain
Examples of using Diameters
Show more
Wide choice of diameters and lengths available
Diameters not indicated may be supplied on request
Only use saw blade diameters corresponding
