Examples of 'pipe wall' in a sentence
Meaning of "pipe wall"
pipe wall: This phrase is commonly used in engineering or construction contexts to describe the thickness or structure of a pipe's enclosure
How to use "pipe wall" in a sentence
Basic
Advanced
pipe wall
Shorten the length of the pipe wall.
Based on pipe wall thickness steel pipes only.
Clamp allows you to attach the pipe wall.
Pipe wall thickness too thin.
An example of such an article is a pipe wall.
Pipe wall maximum thickness exceeded.
For simplicity the pipe wall has not been shown.
Pipe wall measurement.
A pressure wave can also be modified by pipe wall resistance.
A pipe wall thickness gauge or pipe tables can be used for this.
Ates the pipe wall.
Both factors increase heat transfer across the pipe wall.
Copper pipe wall and makes the pipe look like a flute.
Damage to the pipe wall.
The thick pipe wall is needed in order to make room for the cut thread.
See also
Accounts for mass transfer limitations when modeling pipe wall reactions.
The flux normal to the pipe wall is measured by probes close to the wall.
Attempts were also made to reinforce the pipe groove or adjacent pipe wall.
The ability to control the pipe wall temperature throughout the freeze process.
The resistance is lower than steel pipe because of the smooth pipe wall.
The pipe wall thickness variation was within the tolerance for the pipe size.
A smoother wall results in a more uniform velocity profile than a rough pipe wall.
The effects of the host pipe wall thickness and the grout strength are also discussed.
Inspect the liner to be sure the rubber did not separate from the pipe wall.
The apertured pipe wall thus functions effectively as a further baffle trapping entrained liquid droplets.
Check that the bottom of the weld coupling is in contact with the pipe wall.
Possible fouling of the outlet pipe wall or the sleeve will hereby have little effect.
Note that the actual internal diameter varies depending on the pipe wall thickness.
However, the pipe wall thickness often is unknown.
The pipe comprises one or more branch conduits branching off of the pipe wall.
THK is the actual pipe wall thickness.
This creates a blockage in the fluid system and increase friction on the water pipe wall.
Provided with a variety of ring options to maintain full pipe wall thickness for abrasive systems.
The cooling rate therefore decreased from the outside to the inside of the pipe wall.
Notify me of updates to Pipe wall termination.
The membrane pipe wall tube is not connected to the inlet header 5.
Thereafter the bag is expanded to urge the sleeve against the pipe wall being repaired.
Calculation of pipe wall thickness, choice of pressure class.
Some of the adhering fuel flows along the intake pipe wall into the cylinder.
The pipe wall is punched in the field, in desired locations on its wall.
When the diameter is too large, the pipe wall is sometimes thickened.
After drying, it tends to adhere to the dust collector and the pipe wall.
In centrifugal casting, the pipe wall is built from the outside inwards in a rotating mold.
Alternatively, the electrodes could lie at least partly embedded in the pipe wall.
Figure 2 shows a cross-section of the tank or pipe wall taken along the leak alarm conduit.
The wall-forming plastic profiles are welded together to form a tight pipe wall.
Thereby, discharge will take place through said pipe wall opening and the discharge pipe.
In the latter cases, the piezoelectric elements have to be disposed outside the pipe wall.
The estimated stress in a pipe wall is calculated using the following equation, EPMATHMARKEREP.
Consequently, although localised notch cracking may take place, fracturing of the pipe wall is avoided.
You'll also be interested in:
Examples of using Pipe
Show more
Pressure transmission pipe in the combustion chamber
Pipe is the heaviest wave in the world
Two pieces of pipe and a bicycle chain
Examples of using Wall
Show more
Our wall has not fallen down
Identify an appropriate wall to fix the machine to
Wall mounting the rear speaker system
